633010
19
Zoom out
Zoom in
Previous page
1/39
Next page
1717
ATTACHING CGO4 GIMBAL CAMERA TO MULTICOPTER
NOTICE: Remove the fixed foam pad from the CG04 gimbal camera before proceeding.
STEP 1 Insert the gimbal connection cord to the inner side of gimbal damping plate
(relative to the direction of H920 power connection port).
STEP 2 Mount the gimbal thumb screws and lock washers (4 pcs) to
the gimbal and rotate the screws until they’re secured into the gimbal
damping plate.
NOTICE: The front of the gimbal should be installed in the direction of
the nose of H920.
NOTICE: Use the dedicated lock washers when rotating the screws.
STEP 3 Connect the gimbal power cord to H920 gimbal connection port.
INSTALLING THE GB603 DAMPING PLATE
STEP 1) Remove the damping carbon plate
on the front of the aircraft by disassem-
bling the screws.
STEP 2) Plug the damping balls at the four corners (3 balls at each corner, 12 balls in total)
on the damping plate.
STEP 3) Place the damping plate right below the aircraft body and above the other damping
carbon plate, make sure the flat surface facing towards the aircraft body and concave-con-
vex surface towards the carbon plate.
STEP 4) Re-install the damping carbon plate and make sure the Damp Carbon Plate is
under the Damping Plate. Make sure the damping balls aiming at the corresponding holes
on the damping carbon plate.
STEP 5) Plug all damping balls into the 12 holes on the damping carbon plate.
STEP 6) Screw the two dowels on the diagonal damping balls to fix all the damping device.
CAUTION: Make sure the damping plate is installed correctly, otherwise it might fall off!
Damping Plate
Damping Carbon Plate
Damping Plate
Dowel
Rubber
Damper
Damping Carbon Plate
Damping Plate
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920

Yuneec Tornado H920 Quick start guide - English - 1 pages

Yuneec Tornado H920 User Manual - English - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info