669702
17
Zoom out
Zoom in
Previous page
1/40
Next page
16
1.
When the flight altitude of the aircraft is lower
t
han the desired altitude, it will climb to the desired
altitude
vertically first, then fly back at the current
altitude
and descends vertically within 13-26ft(4-8m)
of the pilot until it automatically lands.
2.
When the flight altitude of the aircraft is higher
t
han the desired altitude, it will fly back at the
curr
ent altitude, then descend vertically within
13-26ft
(4-8m) of the pilot until it lands
automaticall
y.
Befo
re switching to Home Mode, press the Setting
Calibration
button on the right task column. Select
Home
Altitude and set a altitude as the desired
altitude, and then Home Mode can be activated. The
flight path is as follows:
If H920 PLUS loses the link with the ST16 Ground Station, it will automatically enter
Home Mode.
NOTICE:
If the Ground Station signal is lost, H920 PLUS will automatically return to
home point and hold its position (with a suitable GPS signal/lock) over the home
position (except in instances of low battery, where it will land itself).
PILOT LOCATION
LANDING
LOCATION
8m�(HOME)�
Horizontal�Distance�from�Pilot
Pilot
ADDITIONA
L FUNCTIONS:
If the PAN mode of the gimbal camera is switched to Follow and Follow Pan Controllable
modes, the gimbal TILT angle will be adjusted as the same as the angle what the gimbal
camera is at each waypoint after the pilot set the waypoints automatically and continuously.
When the PAN mode is switched to the Global Mode, the PAN and TILT angle can be
controlled by aileron and elevator stick.
N
OTICE: The direct distance between every two waypoints should be more than 16 ft./5 meters.
T
as k MODES
Ta
p the TASK/CAMERA icon, the background of 'TASK' will become orange, then the menu
opens
another interface displaying functions: WAYPOINT, CCC (Curve Cable Cam),
Journe
y, POI (Point of Interest), ORBIT ME and TAKE OFF.
16
If H920 PLUS loses the link with the ST16 Ground Station, it will automatically enter Home Mode.
NOTICE: If the Ground Station signal is lost, H920 PLUS will automatically return to home point and
hold its position (with a suitable GPS signal/lock) over the home position (except in instances of low
battery, where it will land itself).
Before switching to Home Mode, press the Setting Calibration
button on the right task column. Select Home Altitude and set
a altitude as the desired altitude, and then Home Mode can be
activated. The ight path is as follows:
1. When the ight altitude of the aircraft is lower than the
desired altitude, it will climb to the desired altitude vertically
rst, then y back at the current altitude and descends vertically
within 13-26ft(4-8m) of the pilot until it automatically lands.
2. When the ight altitude of the aircraft is higher than the desi-
red altitude, it will y back at the current altitude, then descend
vertically within 13-26ft (4-8m) of the pilot until it lands auto-
matically.
ADDITIONAL FUNCTIONS:
Task MODES
Tap the TASK/CAMERA icon, the background of ‚TASK‘ will become orange, then the menu opens
another interface displaying functions: WAYPOINT, CCC (Curve Cable Cam), Journey, POI (Point of
Interest), ORBIT ME and TAKE OFF.
CCC: (Curve Cable Cam) Curve Cable Cam allows creation of a ight route/mission for
H920 PLUS to y. Once the pilot sets the points, H920 PLUS will y the set coordinates
while remembering the heading.
If the PAN mode of the gimbal camera is switched to Follow and Follow Pan Controllable modes, the
gimbal TILT angle will be adjusted as the same as the angle what the gimbal camera is at each way-
point after the pilot set the waypoints automatically and continuously. When the PAN mode is swit-
ched to the Global Mode, the PAN and TILT angle can be controlled by aileron and elevator stick.
NOTICE: The direct distance between every two waypoints should be more than 16 ft./5 meters.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 Plus in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920 Plus

Yuneec Tornado H920 Plus Quick start guide - English - 2 pages

Yuneec Tornado H920 Plus Quick start guide - German - 2 pages

Yuneec Tornado H920 Plus User Manual - German - 40 pages

Yuneec Tornado H920 Plus User Manual - French - 40 pages

Yuneec Tornado H920 Plus Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info