669800
34
Zoom out
Zoom in
Previous page
1/39
Next page
33
STEP 5)
Push the camera forward into Camera Frame.
NOTICE: Make sure the Camera Battery and SD card
have been installed!
STEP 6) Rotate the upper and lower Camera
Fastening Screws to secure postion as illustrated.
NOTICE: If the camera has WiFi connectivity with a
mobile device, you may mount the mobile device to
the special mount located at the front of the
ProAction™ to use it as a view finder. For detailed
operations, please refer to your camera
manufacturer's instruction manual. Skip this
procedure if your camera or phone doesn't have this
function.It requires securing the fastening screws of
camera lens if the GB603 is with a SONY a7 lens
mount frame.
FOR THE SONY® α7 CAMERA
STEP 1) Replace the GH4 camera lens mount frame
with SONY® α7 lens mount frame, and secure the 10
screws on the top and bottom of the frame to fix the frame.
STEP 2) Install the infrared ray mount device to the
left side of the SONY® α7 lens mount frame, secure
the screw on the bottom of the device, and connect
the white connector to the IR port.
STEP 3) Mount the SONY® α7 CG balancer on the
GB603 as illustrated.
STEP 4)Install the SONY® α7 camera on the camera mount referring to the GH4
camera, there is no need to connect shutter cable for SONY® α7.
STEP 5) Push the camera forward into Camera Frame.
STEP 6) Rotate the Camera Fastening Screw to secure position as illustrated.
STEP 1
STEP 2 STEP 5STEP 3
ATTACHING CGO4 GIMBAL CAMERA TO PROACTION
STEP 1: Withdraw the Gimbal Cord from the left side first, then securely attach the CGO4 to
the ProAction™ with Gimbal Fastening Screws.
STEP 2: Insert the Gimbal Cord into the center carrying handle socket.
STEP 3: Install the ProAction™ Battery and engage the connector properly.
STEP 4: Download the CGO4 app from Google play or App store.
STEP 5: Erect the phone holder and install the mobile phone into it, and then you can make
Wi-Fi connection between CGO4 and mobile device by joining the CGO4 network in your phone’s
Wi-Fi setting.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 Industry at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 Industry in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info