Manual Yuneec Tornado H920 Industry (page 24 of 39) (English)

669800

Zoom out

Zoom in

1/39

STEP 1) Lift the H920 airframe straight & level, then point the nose towards the north

and hold it in this position for 4 seconds. The LED status indicators will automatically

start to flash red/green/blue quickly. Slowly turn the H920 forward and around 360

degrees (pitch axis) until it is flat again.

STEP 2) Turn the H920 45° to the left and then turn it forward 360° again until it is lying

flat in your hands again.

STEP 3) Turn the H920 45° to the left and then turn it forward 360° again until it is lying flat.

STEP 4) Turn the H920 45° to the left and then turn it forward 360° again until it is lying flat.

STEP 5) Turn the H920 45° to the left and then turn it forward 360° again until it is lying flat.

CAUTION: Steps 1 to 5 should be completed within a time span of 30 seconds in order

to achieve successful calibration.

STEP 6) Place the H920 on the ground and wait a few seconds.

If the calibration has been successful, the flight controller restarts, you will recognize

this when you hear the acknowledgement tone, the same one you hear when you

switch the system on.

IMPORTANT NOTE:

If calibration has failed, you must switch off the aircraft manually

by repeating the calibration process. If the calibration should continue to fail, either

the site of calibration is unsuitable or the compass is defective. Refer to your Yuneec

service center.

STEP 1 STEP 2 STEP 3

STEP 4 STEP 5 STEP 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 Industry in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yuneec Tornado H920 Industry Manual

Product: