669695
78
Zoom out
Zoom in
Previous page
1/83
Next page
Yuneec Electric Aviation
H520 Start Guide
78
BATTERY CHANGES DURING MISSION
If a battery change is required during a planned mission, the H520 will automatically execute a RTL and
land. Once the H520 has landed, remove the depleted battery and replace with a charged battery. Wait
for the H520 to establish a connection with the ST16S and GPS lock.
Once both signals have been locked, a ‘Resume Mission’ slider will appear on the bottom of the Fly
view. Slide the arrow to confirm resuming the mission. Ensure the launch area is clear of personnel,
equipment and obstacles, prior to sliding the ‘Resume Mission’ slider.
ENDING A MISSION
Once the H520 has landed after completing a mission, a pop-up window will appear on the right side of the
DataPilot™ Home Screen. This window will ask if the Pilot would like to leave the mission on the H520 or
remove the mission from the H520. Selecting to remove the mission will delete the current mission from
the aircraft’s memory. Uploading a new mission will overwrite the current mission on the H520.
REFLY A MISSION
After completing a mission, if the mission requires re-flight, tap on the first waypoint (to reset the current
mission item), and then tap ‘Start Mission’ under the Action button menu. The mission will begin again from
the beginning. Similarly, if the Pilot wants to resume the mission from a certain waypoint, he can select that
waypoint, and then choose ‘Start Mission’ as above.
REMOVING A MISSION
To remove the current mission on the H520, either upload a new mission or select ‘Remove All’ from the
Sync button in the Plan panel. Turning off the power to the aircraft and restarting will not remove the
mission.
GEAR SWITCH
In mission mode, the landing gear will automatically retract after reaching takeoff altitude. After the
mission is complete and a RTL is triggered, the landing gear will continue to stay up until it reaches the home
position. The landing gear will come down prior to descending from the RTL altitude. To deploy the landing
gear after exiting Mission mode, the Pilot may need to cycle (flip up and down) the landing gear switch to
activate the switch. However, in Angle and Manual flight mode, the gear switch will respond correctly to
the selected position.
Note:
The aircraft may take up to two minutes to reconnect.
Note:
During RTL after mission complete, the Pilot may need to
cycle (flip up and down) the
landing gear switch twice to bring down the landing gear.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec H520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec H520 in the language / languages: English as an attachment in your email.

The manual is 14,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec H520

Yuneec H520 Quick start guide - English - 46 pages

Yuneec H520 Additional guide - English - 13 pages

Yuneec H520 Quick start guide - German - 46 pages

Yuneec H520 Additional guide - German - 13 pages

Yuneec H520 User Manual - German - 84 pages

Yuneec H520 Quick start guide - French - 46 pages

Yuneec H520 Additional guide - French - 13 pages

Yuneec H520 User Manual - French - 82 pages

Yuneec H520 Quick start guide - Italian, Portuguese, Spanish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info