669695
77
Zoom out
Zoom in
Previous page
1/83
Next page
Yuneec Electric Aviation
H520 Start Guide
77
VIEWING A MISSION ON THE ST16S
To view the current mission while the H520 is flying, return to the DataPilot™ home screen by tapping the
Y icon. Tap the map rectangle in the lower left corner to switch to the map view. The map view shows the
planned mission with the current location of the H520 overlaid on a map. The Pilot can follow and track the
status of the mission in this view, as well as see camera indicators where images are being captured.
To switch back to the camera view, tap on the rectangle on the lower left corner. This view displays the live
video feed from the camera and enables the Pilot to observe the surroundings from the perspective of the
camera.
INTERRUPTING A MISSION
To interrupt a mission in progress, move any of the control sticks on the ST16S, this will give the Pilot
immediate control of the H520.
To auto-return to the home/launch position, flip the switch S4 on the ST16S from Angle flight mode (middle
position) to RTL mode (bottom position). Return to home may also be executed by selecting the RTL mode
from the mode menu in the top center. Select manual mode (top position of S4) if manual control of the
aircraft is preferred. During the mission, gimbal settings may be adjusted at any time via the gimbal control
switches and dials on the ST16S.
If an RTL is triggered during a leg (between two waypoints), the default resume mission action will re-start
from the current waypoint and not the destination waypoint. If the Pilot wants to resume from the next
waypoint or another waypoint, he must specifically select that waypoint.
PAUSING A MISSION
The Pilot may want to pause a mission to avoid obstacles or regain his bearings. To pause a mission, tap on
the Pause button in the Fly panel. This will cause the H520 to hover and maintain its position. This feature
is useful when needing to
RESUMING A MISSION
To resume an interrupted mission, slide the ‘Resume Mission’ slider on the bottom of the DataPilot™ home
screen. If the slider is not present or if the dialog box has been closed, tap the Action button on the Fly menu
and select ‘Resume Mission’.
The first ‘Resume Mission’ confirmation rebuilds and uploads the updated mission plan to the aircraft. If
the upload times out due to an error, the Pilot can swipe to try the upload again. Once the new mission is
successfully uploaded, the user must confirm another ‘Resume Mission’ dialog to takeoff and re-
start/resume the mission.
Note:
The
aircraft
must acquire a GPS lock before it can resume a mission.
If the user swipes
the second ‘Resume Mission’ confirmation without GPS ready, the system will display
a "Unable to start mission: Aircraft not ready" error. In this scenario, the ‘Resume
Mission’ dialog will be hidden. To resume the mission, tap on the Action button and
select ‘Start Mission’. Because the new mission has already been uploaded to the
aircraft
,
‘Start Mission’ will resume the correct mission.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec H520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec H520 in the language / languages: English as an attachment in your email.

The manual is 14,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec H520

Yuneec H520 Quick start guide - English - 46 pages

Yuneec H520 Additional guide - English - 13 pages

Yuneec H520 Quick start guide - German - 46 pages

Yuneec H520 Additional guide - German - 13 pages

Yuneec H520 User Manual - German - 84 pages

Yuneec H520 Quick start guide - French - 46 pages

Yuneec H520 Additional guide - French - 13 pages

Yuneec H520 User Manual - French - 82 pages

Yuneec H520 Quick start guide - Italian, Portuguese, Spanish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info