663743
13
Zoom out
Zoom in
Previous page
1/86
Next page
20
19
Time setup
Enter the submenu with a brief press of the controller.
Time format is displayed as: “format mm/hh” (24 06:51)
Rotate the controller to select the required time format - 24/AM/PM. To set the hour value, briefly press the
controller .
Rotate the controller to select the hour value (clockwise to increase the value; counterclockwise to
decrease the value).
To set the minute value, briefly press the controller.
Rotate the controller to select the minute value (clockwise to increase the value; counterclockwise to
decrease the value).
To save the time settings and to exit the submenu, press and hold down the controller for more than one
second.
Current time in the format selected is shown on the display.
The set value is saved.
When the unit is next switched on, the display shows the last saved value.
Sound record activation
This menu option allows you to activate/deactivate sound recording only during video recording.
Enter the submenu with a short press of the controller.
Use the navigation buttons to select one of the options:
Yes to activate sound recording.
No to deactivate sound recording.
Confirm your selection with a short press of the controller.
When activating sound recording, the icon appears on the display. Icon is shown when sound is
deactivated.
The sound record icon is shown on the display in the VIDEO and PHOTO modes.
The set value is saved.
When the unit is next switched on, the display shows the last saved value.
Selection of reticle shapes
Enter the main menu with a long press of the controller.
Enter the submenu “Reticle type” rotating the controller.
Select the desired reticle shape out of the list of 6 reticles rotating the controller.
The reticle types change as the cursor goes down the reticle list.
Confirm you selection with a short press of the controller.
When changing the digital zoom, the reticle does not change.
To exit menu, keep the controller pressed for two seconds or wait 10 seconds to exit automatically.
The list of available reticles can be found at www.yukonopticsglobal.com
Selection of reticle color
Enter the main menu with a long press of the controller.
Enter the submenu “Reticle color” rotating the controller.
Rotate the controller to select the required reticle colour (black (B), white (W), red (R) or green (G)). Press the
controller to confirm your choice.
Confirm you selection with a short press of the controller.
To exit menu, keep the controller pressed for two seconds or wait 10 seconds to exit automatically.
The riflescope features “one shot” zeroing method. Zeroing should be done at operating temperatures,
by following the order of these steps:
Mount the rifle with the sight installed on a bench rest.
Set a target at a distance of about 100m.
Adjust the riflescope according to the instructions of section “OPERATION”.
One shot zeroing
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yukon Photon RT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yukon Photon RT in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info