820687
8
Zoom out
Zoom in
Previous page
1/18
Next page
14 15
1. Press to activate or deactivate the remote temperature alert, When the remote
temperature alarm is activated, the temperature alarm icon is displayed in the remote
sensor bar
1. Press and hold the button for 2 seconds to enter the air pressure unit and weather
settings, the pressure units will be ashing, Use and to set the pressure unit to
display in “hPa/mb” or “inHg”.
2. Press to conrm the settings and switch to the weather,
the weather graphics will be ashing, Use the and button to set the current weather
conditions, so that the weather forecast is more accurate.
3. The weather station displays the following weather symbols
The weather station can display the barometric pressure trend
You may see the following displays:
If the battery symbol appears the batteries in the remote sensor should be replaced
as soon as possible.
The weather station calculates a weather forecast for about the next 12 hours based on
the barometric pressure trend. Of course this forecast can’t compare to that of profes-
sional weather services supported by satellites and high performance computers, but
merely provides an approximate indication of current developments. Please take the
weather forecast from your local weather forecasting service into account as well as the
forecast from your weather station. If there are discrepancies between the informa¬tion
from your device and from the local weather forecasting service, please take the advice
of the latter as authoritative.
2. When the remote channel temperature value exceeds the set temperature range, the
alarm will activate, the weather station will sound a continu¬ous alarm 5 times every
minute, at the same time the temperature alarm icon ashes, If the alarm activates
the temperature that is currently displayed on the channel will be the alarm temperature
value and the alarm upper limit icon or lower limit icon also ashes.
3. When the temperature of REMOTE SENSOR is -1°C to + 3°C or +30°F to + 37°F, the frost
alarm will be activated, and the symbol will be ashing.
17
18
19
Temperature and frost alert
Low battery
The weather forecast
F.Y.I
When the temperature is higher than the upper limit of the alarm temperature
setting, the upper limit alarm will activate and the symbol ashes.
When the temperature is lower than the lower limit of the alarm tempera¬ture
setting, the lower limit alarm will activate and the symbol ashes.
The barometric pressure will rise.
The barometric pressure will remain constant.
The barometric pressure will fall.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yono WS300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yono WS300 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info