820687

Yono WS300 Manual

7
Zoom out
Zoom in
Previous page
1/18
Next page
12 13
13 15
Displaying temperature/humidity/ baro-metric
pressure and temperature/humid¬ity trend Maximum/Minimum Temperature/Relative Humidity
The current indoor temperature/humidity/barometric pressure and the temperature/
humidity trend (indoors) are shown in the LCD display.
To toggle indoor/ remote maximum/minimum temperature and humidity data, press the
“MEM” button:
To reset the maximum and minimum temperature and humidity, press and hold down the
“MEM” button about 2 seconds. This will reset all mini¬mum and maximum data recorded
to the current displayed values.
• Once to show the maximum temperature and humidity values.
• Twice to sow the minimum temperature and humidity values
• Three times to return to the current temperature and humidity levels
After successfully connecting with the remote sensor, the weather station can display the
remote temperature/humidity and the temperature/humid¬ity trend (remote)
1. When the Weather Station successfully receives signals from the wireless sensor, the
temperature and humidity of the “REMOTE SENSOR” are displayed on the “REMOTE SENSOR”
column of the weather station. 1. Press and hold down the button for 2 seconds until the icon for the Temperature Alert”
starts to ash
2. The icon of Upper limit of the Temperature alarm starts to ash. Use and to set the
required maximum temperature. Press to conrm your setting.
3. The icon of the Lower limit of the Temperature alarm starts to ash. Use and to
set the required minimum temperature. Press to conrm your setting and to end the
setting procedure
2. The weather station can connect up to 3 wireless sensor registra¬tion channels, if you
use multiple wireless sensors, the wireless sensors can not have the same channel at the
same time (you can choose a total of 1, 2, 3 channels).
3. Pressing the key can switch the display of different channels of remote temperature
and humidity, when displaying the symbol the channel display will automatically
switch channel every 5 seconds
4. If the weather station failed to receive transmission from remote sensor (“- -display on
the LCD), press and hold the button for 3 seconds to receive the transmission manually,
the remote temperature will show an anima¬tion of the RF antenna symbol, the Base
Station will re receive the wireless signal of the remote sensor.
1. When the wireless sensor is set up on a different channel, the weather station “REMOTE
SENSOR” wants to switch to the same channel. When there is no wireless sensor signal
transmission on the channel, “--” will be displayed in the channel of the weather station.
2. When the wireless remote sensor has no channel selection function, the sensor defaults
to channel 1.
You may see the following displays
The temperature/humidity is rising.
The temperature/humidity is remaining constant.
The temperature/humidity is falling.
14
16
Remote sensor transmission
Remote Temperature alert setting
F.Y.I
F.Y.I
F.Y.I
• If the temperature reading is below ranges, the LL.L will be displayed. If the tempera-
ture reading is above ranges, the HH.H will be displayed.
• Before entering the setup, you must select the remote channel, you can set a differ-
ent temperature alarm for different channels.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yono WS300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yono WS300 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info