654138
20
Zoom out
Zoom in
Previous page
1/48
Next page
A-Set the controller SS time delay parameters in C.FN 01:
(refer to Page 14)
B-Using Super Sync:
1).Set the flash into manual mode. It supports to use the flash
which is set on the hot-shoe of the transceiver or connect the
flash through PC port. Setting full power flash output (1/1) may
be needed.
Adjust SS to a suitable time delay parameters according to
the flash model, output power and shutter speed.
2).Set the flash sync speed of the camera as high speed sync,
the maximum shutter sync speeds can reach to 1/8000s.
3).Take photos and check whether the flash of the photos is
synchronous. The gradations or variations of the light will be
seen in the photos. The flash result will be different due to
different cameras and flashes.
2. About the Automatic Save Function:
Then controller will automatically save the settings of channel,
grouping, flash mode, AF assist beam emitter etc.
1.
Use non-HSS (Non High Speed Sync) flash to realize High
Speed Sync. This function is more applicable to strobes
flashes whose flash duration is longer. It should be used with
cameras which supports High Speed Sync (HSS) and setting
SS time delay parameters.
About the Super Sync(SS)
Reference
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yongnuo YN-622C-TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yongnuo YN-622C-TX in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info