540489
31
Zoom out
Zoom in
Previous page
1/84
Next page
5-4
IM 1F5B2-01E
Follow the procedure below to attach a flameproof packing adapter (optional) (see Figure 5.3-2).
<1> Turn the lock screw clockwise to remove the cover on the terminal box.
<2> Measure the outer diameters of the cable being used, in two different directions, to
an accuracy of 0.1 mm.
<3> Determine the average of the outer diameters in two directions. Choose the
packing whose inner diameter is closest to the average from the three supplied
packings (see Table 5.3).
<4> Screw the adapter’s main assembly into the wiring port of ULTRA YEWFLO and
fasten the assembly with the locknut. (Be sure to insert the O-ring.)
<5> Insert the pressure nut, union coupling, plate packing, washer, rubber packing and
washer, in this order, into the cable. Connect each wire of the cable to their
respective terminals through the main assembly of the flameproof packing adapter.
<6> Fasten the pressure nut to fix the adapter. For a proper tightening torque, apply
another two or two-and-a-half turns to the pressure nut at a point where the rubber
packing begins to compress.
<7> Fasten the stop screw on the pressure nut.
<8> Reinstall the cover on the terminal box. Turn the lock screw counterclockwise to
fasten the cover.
Lock screw
Cable
Hexagon-socket
stop screw
Pressure
nut
Plate
packing
Washers
Union coupling
Rubber packing
Locknut
O-ring
Figure 5.3-2 Attachment of Flameproof Packing Adapter
Integral type
Remote type
detector
Remote type
detector
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yokogawa UYF200 Ultrasonic Vortex Flowmeter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yokogawa UYF200 Ultrasonic Vortex Flowmeter in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info