813336
26
Zoom out
Zoom in
Previous page
1/32
Next page
26
16.5 Disconnect the 4 coloured wires running from the firebox to
the heater assembly, see Diagram 35 noting the orientation.
Disconnect wires
Disconnect
wires
35
16.6 Fit new heater assembly, ensuring all wires are correctly
attached and the heater is secured to its casing using 4
screws.
16.7 Reattach heater casing to bottom of firebox using 5 screws.
16.8 Relocate the stove to its original position and replace any
loose top plates or panel
17. Replacing the PCB
17.1 Follow Sections 4, 5, 6, 7, 8, 9, 10, 11, 12, & 13 to access
the PCB.
17.2 Remove all the wires and connectors to replace the PCB.
Note the orientation of the connectors.
17.3 Remove the 2 screws and using a pair of long nosed pliers
squeeze the 2 clips that hold the PCB to the appliance in
order to release, see Diagram 36.
Screw
Screw
Clip
Clip
36
17.4 Replace in reverse order ensuring the wires and connectors
are put back in exactly the same configuration.
PLEASE ENSURE NO WIRES ARE TRAPPED.
18. Replacing the RF Receiver
18.1 Refer to Section 4 to remove the Cast Front & Exterior
Glass.
18.2 With the exterior glass removed carefully gather up the fuel
effect and place to one side.
To replace the fuel effect see Installation Instructions
Section 4 for layout.
18.3 Carefully tilt the appliance backwards to access the RF
Receiver.
18.4 Undo the screw securing the RF Receiver to the underside
of the firebox, see Diagram 37.
Underside of
Firebox
37
18.5 Slide the RF Receiver right and remove out of its location.
18.6 Disconnect to remove.
18.7 Replace in reverse order.
Servicing Instructions
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeoman CL Electric Range at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeoman CL Electric Range in the language / languages: English as an attachment in your email.

The manual is 4.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info