813336
25
Zoom out
Zoom in
Previous page
1/32
Next page
25
14.6 Follow the wires to the corresponding connector and
disconnect the motor unit by squeezing the clips on each
side of the plug, see Diagram 29.
NOTE: The cable clip may need to be removed to gain
access to the connector, ensure this is replaced when
operation is complete.
29
Connector
15. Replacing the Flame Effect Motor
15.1 Follow Sections 4, 5, 6, 7, 8 & 11 to access the Flame Effect
Motor.
15.2 Remove the Effect Spindle by pulling the rubber sleeve off
the Effect Motor axle, see Diagram 30.
30
15.3 Remove the 2 screws to release the motor unit,
see Diagram 30.
15.4 Follow the wires to the corresponding connector and
disconnect the motor unit by squeezing the clips on each
side of the plug, see Diagram 31.
31
Connectors
15.5 Replace in reverse order, ensuring the cable ties are
replaced.
16. Replacing the Heater Assembly
16.1 To access the heater assembly remove any loose top plates
or panels, before moving the stove and carefully laying the
stove on its back.
16.2 Remove the 5 screws securing the heater casing to the
bottom of the firebox, see Diagram 32.
Screws
Heater Assembly Case
Bottom of Firebox
32
16.3 Remove the 4 screws from the front of the heater casing,
see Diagram 33 to free the heater assembly.
Screws
33
16.4 Tilt the heater casing forward and carefully remove the
heater assembly, see Diagram 34.
34
Servicing Instructions
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeoman CL Electric Range at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeoman CL Electric Range in the language / languages: English as an attachment in your email.

The manual is 4.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info