813336

Yeoman CL Electric Range Manual

8
Zoom out
Zoom in
Previous page
1/32
Next page
8
User Instructions
2b.37 Hold the button for 3 seconds or wait for 10 seconds to
save and exit the heating time period setting.
2b.38 Press ‘’ or ‘’ to check the timer setting for the week
timer heating mode.
2b.39 If the heating needs to be turned off, it will be necessary to
go back to the Normal Control Mode to it turn off.
When in Weekly Timer Mode switching the appliance
off with the remote will stop the light output. The heat
output will continue according to the timer settings.
Adjusting the Set Temperature
2b.40 Press the ‘+’ or ‘-’ button to increase or decrease the
temperature on the basis of COMF temperature.
COMF means the actual temperature is the same as setting.
ECO means the actual temperature is 2℃ lower than the
setting temperature.
ECO- means 4℃ lower.
COMF+ means 2℃ higher.
COMF++ means 4℃ higher.
Adaptive start control
According to room temperature and set-pointed temperature,
the heater will automatically determine the appropriate
time to heat to ensure that it will reach the set-pointed
temperature in the set time (up to 45 minutes prior to the set
time).
Advance mode
2b.41 The heating state can be advanced to the next period is
under both the daily and week timer heating mode.
14
If the heater is on in the current period, pressing the button
will turn the heater off.
If the heater is off in the current period, pressing the button
will turn the heater on.
Whether the actual heating will be on/off also depends on
the room temperature and setting temperature.
2b.42 Press to enter the Advance mode under the daily and
week timer heating mode, will show at the upper right
corner of the screen.
2b.43 Press again or timer period ends will exit the Advance
mode.
Window open detecting
2b.44 When the transmitter detects a rapid drop in room
temperature, it will be judged as an open window: the
warning icon will be displayed and the heating will be turned
off automatically.
15
2b.45 After indoor temperature rise or manual intervention (by
operating remote control), it will return to normal working
state.
3. Maintenance
IMPORTANT: THE OUTER PANELLING OF THE CL
IS MADE FROM CAST IRON. USE CAUTION WHEN
INSTALLING, REMOVING AND STORING AS THE
COMPONENTS ARE HEAVY AND SHOULD BE
HANDLED CAREFULLY.
3.1 ALWAYS UNPLUG FROM MAINS SUPPLY BEFORE
CLEANING OR UNDERTAKING ANY MAINTENANCE.
GENERAL CLEANING
3.2 Only clean the outer casing when it is cold. Do not use
abrasive cleaners.
CLEANING FRONTS
3.3 Wipe the glass viewing panel with a damp cloth and buff
with a lint free duster.
Caution: Do not use abrasive cleaners on the glass
panel. Do not spray liquids directly onto any surface of
the unit.
CLEANING THE FUEL EFFECT
To access the fuel effect it will be necessary to remove the
glass viewing panel.
3.4 Ensure the appliance is unplugged.
3.5 Remove the cast top and place carefully to one side.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeoman CL Electric Range at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeoman CL Electric Range in the language / languages: English as an attachment in your email.

The manual is 4.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info