813336
6
Zoom out
Zoom in
Previous page
1/32
Next page
6
2b.12 Press ‘’ or ’ to choose hour or minute.
2b.13 Press ‘+’ or ‘-’ to set the number.
The minute increment / decrement by 15min per press.
7
2b.14 Hold the button for 3 seconds or wait for 10 seconds to
save and exit the heating time period setting.
2b.15 Check the timer setting. Press to check the daily timer
mode.
2b.16 If the heating needs to be turned off, it will be necessary to
go back to the Normal Control Mode to it turn off.
When in Daily Timer Mode switching the appliance
off with the remote will stop the light output. The heat
output will continue according to the timer settings.
Adjusting the Set Temperature
2b.17 Press the ‘+’ or ‘-’ button to increase or decrease the
temperature on the basis of COMF temperature.
COMF means the actual temperature is the same as setting.
ECO means the actual temperature is 2℃ lower than the
setting temperature.
ECO- means 4℃ lower.
COMF+ means 2℃ higher.
COMF++ means 4℃ higher.
Adaptive start control
According to room temperature and set-pointed temperature,
the heater will automatically determine the appropriate
time to heat to ensure that it will reach the set-pointed
temperature in the set time (up to 45 minutes prior to the set
time).
User Instructions
Flame Colour Adjustment
2b.18 Press button to enter the flame adjustment screen.
There are 3 flame colour options, indicated by the number
shown in Diagram 8.
There are 6 levels of brightness, including off. This is
indicated by the bar, with the blank bar indicating off, see
Diagram 8.
Brightness
Level
Colour
Option
8
2b.19 Press the ’ or button to cycle through the flame
colour options.
2b.20 Press the ‘+’ button to increase the flame brightness.
Press the ‘-’ button to decrease the flame brightness until
off.
Fuel Bed Colour Adjustment
2b.21 Press to enter the fuel bed light adjustment screen.
There are 14 fuel bed colour options, indicated by the
number shown in Diagram 9.
There are 6 levels of brightness, including off. This is
indicated by the bar, with the blank bar indicating off, see
Diagram 9.
Brightness
Level
Colour
Option
9
2b.22 Press the ’ or ’ button to cycle through the fuel bed
colour options.
2b.23 Press the ‘+’ button to increase the fuel bed brightness.
Press the ‘-’ button to decrease the fuel bed brightness until
off.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeoman CL Electric Range at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeoman CL Electric Range in the language / languages: English as an attachment in your email.

The manual is 4.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info