734896
14
Zoom out
Zoom in
Previous page
1/21
Next page
14
ASSEMBLY AND OPERATION INSTRUCTIONS
3. Turn off the pressure washer by pressing the switch button with mark “ O ”, activate the safety latch for
a break. For storage, drain machine after use by removing water connection, turning ON the machine for 3
seconds and depressing gun trigger to release remaining water in the pump. Turn OFF immediately. (Fig. 18)
CLEANING DETERGENTS DISPENSER
Only use cleaning detergents recommended for pressure washers.
Always follow detergent manufacturer’s label recommendations for proper use of detergents or soap. Al-
ways protect eyes, skin and respiratory system from detergent if used.
CAUTION
Working with detergent ensures a quick soaking of the dirt, and allows the high-pressure water to
penetrate and remove the dirt more effectively.
To apply detergents, you must be operating at low pressure. This provides a gentle application of
detergent, with the pressure equivalent to the lowest garden hose. The high-pressure setting is
used for cleaning, you cannot apply detergents when working at high pressure.
Always test detergent in an inconspicuous area before use.
NO BLEACH!
1. Engage gun safety lock.
Fig. 19 Fig. 20
2. Attach the low-pressure spray tip (black) for soap or detergent application. Detergent application will
only work with low pressure spray tip.
3. As shown Fig.20 remove the cap of detergent tank, ll tank with detergent or soap and replace the cap.
Apply detergent as instructed by the detergent manufacturer.
4. Turn on the pressure washer. Squeeze trigger to operate unit. The liquid detergent will automatically mix
with water, and be discharged through the nozzle. Apply detergent to work surface, from bottom to top.
5. Allow detergent to remain on the surface for a short time before rinsing. Do not allow detergent to dry
on surface.
6. Rinse with clean water under high pressure. On a vertical surface, rinse from the bottom up, then rinse
from the top down to avoid streaking. Hold nozzle 8-10” from the cleaning surface, at a 45° angle.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce YF2200LC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce YF2200LC in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info