Manual Yardforce YF2200LC (page 13 of 21) (English)

734896

Zoom out

Zoom in

1/21

OPERATION INSTRUCTIONS

WARNING

Risk of injury, Do Not Direct discharge stream at self or other persons.

WARNING

Before cleaning any surface, an inconspicuous area should be cleaned to test spray pattern

and distance for maximum cleaning results.

ASSEMBLY AND OPERATION INSTRUCTIONS

Fig. 16

1.Turn ON the pressure washer by pressing the button with mark “ I ”. The unit will run for a few seconds to

build up pressure, then will stop on the function of total stop system (TSS). (Fig. 16)

2.Release the trigger lock and squeeze the gun trigger until there is a steady stream of water. Change the

spray tip as per the recommendation above if necessary. Before changing spray tip, switch the machine

OFF, depress trigger to release pressure and engage the trigger lock. (Fig. 17)

CAUTION

Make sure spray tip and wand is well locked. Do not remove the spray tip while trigger is

depressed.

CAUTION

If painted surfaces are peeling or chipping, use extreme caution as pressure washer may

remove the loose paint from the surface.

For most cleaning applications, a twenty-ve degree (25) spray angle is recommended to

avoid damage to the surface being sprayed.

The pressure of spray on the surface will increase when you move the wand closer to the

surface.

Fig. 17

Fig. 18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce YF2200LC in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yardforce YF2200LC Manual

Product: