734895
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
WARNING!
WARNING!
Risk of eye injury.
Spray could splash back or propel objects resulting
in serious injury.
Always wear indirect vented (chemical splash) safety
goggles marked to comply with ANSI Z87.1 when using
or in vicinity of this equipment.
NEVER substitute safety glasses or dry-condition
goggles for indirect vented safety goggles.
8.
one hand. Pull the starter handle out 10-15cm/4-6’’ until
Recoil start.
Stand behind the machine,hold the handle firmly with
you feel a resistance and then start the engine with a
sharp pull. You can also use remote control to start your
pressure washer, see “Remote Control Mode” section.
The pressure washer has been matched with the remote control.
When using this function for the first time, please make sure that
• The battery pack is well charged and well installed.
• The green breathing light on the battery pack tank flashes at a
frequency of once per second.
• Make sure the engine On/Off switch is on (I) position. Then you
can take out the remote control from the spray gun to start using
your remote control function.
1. Press the Start button on the remote control to start the engine.
2. Press the STOP button, the engine will be powered off.
1. The max control distance is 100 feet without obstacles blocking.
2. With a fully charged battery pack, it can reach almost 100 times
starts.
Servo function of the remote control.
When there is no operation for one hour, the remote function will
be automatically turned off to save power. To resume the remote
control function, you can press the remote control connection button
on the breathing light or reinstall the battery pack.
Matching your remote control.
When the remote control function is abnormal, or if the remote
control is damaged or lost and replace a new remote control, you
need to match the remote control to your pressure washer.
1. Press and hold the remote control connection button on the
breathing light for at least 3 seconds and you will see the green light
flashes as the frequency of twice per second.
1. Release trigger
2. Push engine On/Off switch to OFF
(O)
position. Or you
can use the remote control to stop the engine see “Remote
Control Mode” section.
Hold for 5 seconds
9.Squeeze trigger for more than 5 seconds until there is
a steady stream of water.
How to Stop
Remote Control Mode
Your Pressure Washer
Every time when you stop engine, ALWAYS point spray
gun at safety direction, release thetrigger lock, and
squeeze spray gun trigger to release high pressure.
3. Put the spray gun back to the gun holder.
A small amount of water will squirt out when you
release the pressure.
NOTICE:
NOTICE:
Switch ON
Switch OFF
.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce Y0GWB31EW00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce Y0GWB31EW00 in the language / languages: English as an attachment in your email.

The manual is 10,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info