734895
10
Zoom out
Zoom in
Previous page
1/24
Next page
10
8.Connect Spray Wand and Quick-Connect Nozzles
9.Charging the battery
10. Install the battery
This 20V Li-Ion battery pack is equipped with a power indicator
which is used to show the battery pack’s remaining charge.
Press the power indicator button to check battery charge as
Open the battery tank cover, insert battery pack into the tank,
make sure it is locked in position, and then close the cover.
-When the battery pack is well installed, the green breathing
light on the remote control button will be illuminated and will begin
to flash at a rate of once per second.
below.
1) Attach other end of high pressure hose to base of spray
gun. Tighten by hand.
2) Attach the spray wand into spray gun. Tighten by hand.
3) Turn OFF the water and release trigger. Point the spray
1. Connect the charger to a power supply. The red LED light on
the charger will be on.
2. To insert the battery pack into the charger, align the grooves
on the battery pack with the raised ribs in the opening of the
charger.
3. Once the battery pack is correctly located in the charger, the
green LED light of the charger will flash continuously during
normal charging.
4. When charging is complete, the green LED lights of the
charger will be on.
gun at a safety direction and make sure trigger is locked
and can’t be squeezed.
4) Choose the quick-connect nozzle you want to use, pull
back on collar of spray wand , insert the nozzle and
release collar. Tug on the nozzle to make sure it is
securely in place. More information please see “How to
Use Quick-Connect Nozzles” section.
15°
40°
Soap
CHECK-LIST BEFORE STARTING ENGINE
Review the assembly to ensure you have performed all of
the following:
• Be sure to read "Safety Rules" and "Operation" sections
before using the pressure washer.
• Make sure handle is in place and secure.
• Check that oil has been added to proper level in engine
crankcase.
Add proper gasoline to fuel tank.
• Check for properly tightened hose connections (high
pressure and water supply) and for tight connections
and that there are no kinks, cuts, or damage to the high
pressure hose.
• Provide proper water supply (not to exceed 100°F).
• If starting pressure washer after storage, see "Storage"
section below.
- The battery pack is supplied partially charged. To ensure
the best performance, charge the battery completely before
first use.
- Make sure the main voltage is the same as rating label
which is located on the charger.
- Remove the battery pack from the charger after it has been
fully charged.
NOTICE:
NOTICE:
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce Y0GWB31EW00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce Y0GWB31EW00 in the language / languages: English as an attachment in your email.

The manual is 10,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info