733774
10
Zoom out
Zoom in
Previous page
1/33
Next page
18 19
Inspect the machine before each use. Never operate
the machine if safety devices (e.g. impact protector,
parts of the cutting facility or bolts) are missing, worn
out or damaged. Check the power cable and starting
lever (if any) for damage. To avoid imbalance, all tools
and bolts must be changed as complete sets.
Only use spare parts and accessories that have been
supplied or recommended by the manufacturer. The
use of alien parts results in the immediate loss of all
guarantee claims.
Ensure that all nuts, bolts and screws are rmly
tightened and that the machine is in a safe working
condition.
Never try to repair the machine yourself, unless you
have been trained accordingly. All work that has not
been listed in these instructions must only be carried
out by authorised servicing agencies.
Treat the machine with the greatest care. Always keep
the tool clean. Follow the maintenance instructions.
Never overload the machine. Always work within
the specied capacity range. Do not use low-power
machines for heavy-duty work. Do not operate the
machine for purposes for which it is not intended.
Electrical safety:
CAUTION!
The following states how to avoid accidents and
injuries due to electric shock:
Before each use, carry out a visual inspection of the
power and extension cord for any signs of damage or
ageing. Damaged mains power cables increase the
risk of electric shock.
Connect the machine to a power socket with a
residual-current circuit breaker that has a rated current
of no more than 30 mA.
Always keep the extension cable well away from
the cutting tools. Should the power cable become
damaged during work, instantly disconnect the power
cable from the mains. DO NOT TOUCH THE POWER
CABLE BEFORE IT HAS BEEN DISCONNECTED
FROM THE MAINS! Risk of electric shock.
The supply cord cannot be replaced. If the cord is
damaged the appliance should be scrapped.
Keep extension cable away from blades and other
moving parts. They may damage the cable and result
in contact with live parts.
Check that the mains voltage is the same as indicated
on the rating plate.
Maintenance and storage
Keep all nuts, bolts and screws tight to be sure the
machine is in a safe working condition.
Replace worn or damaged parts for safety.
Ensure that only the recommended replacement
cutting blades are tted.
SAFETY PRECAUTIONS SAFETY PRECAUTIONS
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce SA800PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce SA800PRO in the language / languages: English as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info