779822
12
Zoom out
Zoom in
Previous page
1/12
Next page
20 21
GB GB
Charging trouble shooting
Problem Possible cause Corrective action
No light on charge base
Incorrect wire connection Check wire connections "F and B"
AC Power has not been switched
ON Switch on AC power
S1 or S2 indicator flashes
separately Boundary wire broken, no signal Repair broken cable with provided
connectors
Robot not charging
Machine not correctly docked in
charge base
Check machine is fully docked in
charge base
Check charge base is on flat
surface
Charger pins corroded Clean the charger pins
Mowing trouble shooting
Problem Possible cause Corrective action
No Power to machine
ON/OFF key has not been
activated
Switch ON the machine and try
again
Robotic Mower has low charge Place machine in the docking
station
Machine fails to START
Time setting not activated Select time schedule and then try
again
Grass build up under deck Clean under deck with brush
Battery power low Place machine in docking station
Grass too long Mow the lawn to 60mm
Cutting height is too low Mow the lawn to 60mm and raise
cutting height
Battery temperature too cold /hot Working condition is between 5
and 45 oC
Boundary wire broken Repair broken boundary wire
Mower outside the
boundary wire Boundary wire is on a slope Modify boundary wire and leave
bigger distance on slope
Parts of the lawn are
uncut
Mower needs more cutting time Increase scheduled cutting time
Grass too long Mow the lawn to 60 mm
Mower gets stuck in Lawn
area
Obstacles on lawn Remove obstacles from the lawn
Boundary wire not correct laid Modify boundary wire to zone out
obstacles
Wire in front of docking station
incorrect installed
1.5 m of straight cable to front of
docking station needed
Excessive vibration/noisy
Blade loose Tighten screw bolt
Blades damaged jammed Replace damaged blades
Grass maybe to high
Increase cutting height, reduce
later step by step or mow the lawn
with ordinary lawnmower first
Cutting motor failure Please call the after sales service
Problem Possible cause Corrective action
Mower runs in circles
Power cable runs parallel/close to
wire Reposition of boundary wire
Front wheel is stuck Clean front wheel area
Signal interfere with robot in
neighborhood
Change to alternative boundary
signal (S1/S2)
Driving motor failure Please call after sales service
Connection issue or broken/cut
boundary wire
Repair/check connections on
charge base and boundary wire
being broken/cut
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce NX 60i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce NX 60i in the language / languages: English as an attachment in your email.

The manual is 8.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info