779822
9
Zoom out
Zoom in
Previous page
1/12
Next page
15
GB
Technical Data
Model NX 60i NX 80i NX 100i
Max cutting area 600 m2800 m21000 m2
Battery pack 28 V/ 2000 mAh 28 V/ 2850 mAh 28 V/ 2850 mAh
Switch power supply
Input: 100-240 V~,
50/60 Hz, 56 W
Output: 32V , CC1.5
A
Input: 100-240 V~,
50/60 Hz, 56 W
Output: 32V ,
CC1.5 A
Input: 100-240 V~,
50/60 Hz, 56 W
Output: 32V ,
CC1.5 A
Power supply model* FY3201500S1/
FY3201500S2/
FY3201500S3
FY3201500S1/
FY3201500S2/
FY3201500S3
FY3201500S1/
FY3201500S2/
FY3201500S3
Mowing time on one charge 60 min 80 min 80 min
Rated voltage 28 V 28 V 28 V
Rated power 50 W 50 W 50 W
No load speed 3500 min-1 3500 min-1 3500 min-1
Cutting width 18 cm 18 cm 18 cm
Cutting height Approx 20-60 mm Approx 20-60 mm Approx 20-60 mm
Charging time 60 min 90 min 90 min
Blade model 846210 846210 846210
Weight 8.5 kg 8.5 kg 8.5 kg
Frequency Band 0-148.5 kHz 0-148.5 kHz 0-148.5 kHz
Magnetic Field Strength 70 dBμA/m 70 dBμA/m 70 dBμA/m
Wifi Frequency Band 2400~2483.5MHz 2400~2483.5MHz 2400~2483.5MHz
Wifi Magnetic Field strength 20dBm 20dBm 20dBm
Max sound pressure level LpA=53 dB, K=3 dB LpA=53 dB, K=3 dB LpA=53 dB, K=3 dB
Max sound power level LwA=64 dB, K=3 dB LwA=64 dB, K=3 dB LwA=64 dB, K=3 dB
Degree of protection:
Robotic Mower IP24 IP24 IP24
Switching power supply IP67, Plug IP44 IP67, Plug IP44 IP67, Plug IP44
Spare parts
Spare Blades 6 Pcs 6 Pcs 6 Pcs
Boundary pegs 150 Pcs 200 Pcs 220 Pcs
Boundary wire 120 m 150 m 200 m
Connectors 3 Pcs 3 Pcs 3 Pcs
* WARNING: For the purposes of recharging the battery, only use the detachable supply unit
provided with this appliance.
Cutting height adjustment
The cutting height can be adjusted by rotating the height adjustment dial located on the top
of the machine. Cutting height range from 20 mm - 60 mm.
NOTE!
We recommend using an ordinary lawn mower or trimmer to cut the lawn below 60 mm
before using the Robotic Mower. This will ensure you get the optimum performance.
Start mowing
After finishing the time settings, now you can start your Robotic Mower
1. Press the button for 4 times to unlock the panel.
2. Press the button and then close the lid, the Robotic Mower will start to work.
Return to the docking station
1. Press the button for 4 times to unlock the panel.
2. Press the button and then close the lid, the Robotic Mower will back to the docking
station.
Emergency Stop
Press STOP button to halt the mower at any time.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce NX 60i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce NX 60i in the language / languages: English as an attachment in your email.

The manual is 8.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info