514481
129
Zoom out
Zoom in
Previous page
1/168
Next page
5-21
FRONT FORK
17. Install:
Outer tube "1"
To inner tube "2".
18. Install:
Slide metal "1"
Oil seal washer "2"
To outer tube slot.
Press the slide metal into the outer
tube with fork seal driver "3".
19. Install:
Oil seal "1"
Press the oil seal into the outer tube
with fork seal driver "2".
20. Install:
Stopper ring "1"
Fit the stopper ring correctly in the
groove in the outer tube.
21. Install:
Dust seal "1"
Apply the lithium soap base grease
on the inner tube.
22. Check:
Inner tube smooth movement
Tightness/binding/rough spots
Repeat the steps 15 to 21.
23. Measure:
Distance "a"
Out of specification Turn into
the locknut.
24. Install:
Collar "1"
Fork spring "2"
To damper assembly "3".
Install the collar with its larger diame-
ter end "a" facing the fork spring.
25. Install:
Damper assembly "1"
To inner tube "2".
To install the damper assembly
into the inner tube, hold the inner
tube aslant. If the inner tube is held
vertically, the damper assembly
may fall into it, damaging the valve
inside.
26. Loosen:
Rebound damping adjuster "1"
Loosen the rebound damping ad-
juster finger tight.
Record the set position of the ad-
juster (the amount of turning out the
fully turned in position).
27. Install:
Push rod "1"
Copper washer "2"
•Adjuster "3"
To damper assembly "4".
While compressing the inner tube
"5", set the cap bolt ring wrench "7"
between the inner tube and locknut
"6".
Fully finger tighten the adjuster onto
the damper assembly.
Fork seal driver:
YM-A0948/90890-01502
Fork seal driver:
YM-A0948/90890-01502
Distance "a":
16 mm (0.63 in) or more
Between the damper
assembly "1" bottom
and locknut "2" bot-
tom.
Cap bolt ring wrench:
YM-01501/90890-01501
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YZ125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YZ125 in the language / languages: English as an attachment in your email.

The manual is 8,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YZ125

Yamaha YZ125 User Manual - German - 172 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info