514481
128
Zoom out
Zoom in
Previous page
1/168
Next page
5-20
FRONT FORK
6. Tighten:
Locknut "1"
Fully finger tighten the locknut onto
the damper assembly.
7. Loosen:
Compression damping adjuster
"1"
Loosen the compression damping
adjuster finger tight.
Record the set position of the ad-
juster (the amount of turning out the
fully turned in position).
8. Install:
Base valve "1"
To damper assembly "2".
First bring the damper rod pressure to
a maximum. Then install the base
valve while releasing the damper rod
pressure.
9. Check:
Damper assembly
Not fully stretched Repeat the
steps 2 to 8.
10. Tighten:
Base valve "1"
Hold the damper assembly with the
cap bolt ring wrench "2" and use the
cap bolt wrench "3" to tighten the
base valve with specified torque.
11. After filling, pump the damper as-
sembly "1" slowly up and down
more than 10 times to distribute
the fork oil.
12. While protecting the damper as-
sembly "1" with a rag and com-
pressing fully, allow excessive oil
to overflow on the base valve
side.
Take care not to damage the damp-
er assembly.
13. Allow the overflowing oil to es-
cape at the hole "a" in the damper
assembly.
The overflow measures about 8 cm
3
(0.28 Imp oz, 0.27 US oz).
14. Check:
Damper assembly smooth move-
ment
Tightness/binding/rough spots
Repeat the steps 2 to 13.
15. Install:
Dust seal "1"
Stopper ring "2"
Oil seal "3"
Oil seal washer "4"
Slide metal "5"
To inner tube "6".
Apply the fork oil on the inner tube.
When installing the oil seal, use vi-
nyl seat "a" with fork oil applied to
protect the oil seal lip.
Install the oil seal with its manufac-
ture's marks or number facing the
axle holder side.
16. Install:
Piston metal "1"
Install the piston metal onto the slot
on inner tube.
Base valve:
29 Nm (2.9 m•kg, 21
ft• lb)
Cap bolt wrench:
YM-01500/90890-01500
Cap bolt ring wrench:
YM-01501/90890-01501
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YZ125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YZ125 in the language / languages: English as an attachment in your email.

The manual is 8,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YZ125

Yamaha YZ125 User Manual - German - 172 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info