62385
87
Zoom out
Zoom in
Previous page
1/96
Next page
83 En
TROUBLESHOOTING
ADDITIONAL
INFORMATION
English
Problem Cause Remedy
See
page
Distorted or too little bass sound. CROSS OVER in SUBWOOFER SET is
set incorrectly.
Set CROSS OVER correctly.
63
One of the night listening modes is
currently selected.
Turn off the night listening modes.
52
Too much bass sound. TruBass is currently turned on. Turn off TruBass.
54
The volume level of the subwoofer is too
high.
Turn down the volume level of the
subwoofer.
Surround sound effects are
insubstantial.
The listening room is not a regular shape. Install this unit in a square or rectangular
shaped room.
There is no wall in the path of the sound
beam.
Try placing a flat object, such as a board,
in the path of the sound beam.
Dolby Digital or DTS sources
cannot be played. (Dolby Digital or
DTS indicator does not light up in
the front panel display.)
The connected component is not set to
output Dolby Digital or DTS digital
signals.
Make an appropriate setting following
the operating instructions for your
component.
The input mode is set to ANALOG. Set the input mode to AUTO.
71
There is noise interference when a
subwoofer is not connected to this
unit.
The protection circuitry was in operation
because a source with strong bass
elements was played back.
Turn down the volume level.
39
Select SWFR for BASS OUT.
63
Connect a subwoofer and adjust settings
for SUBWOOFER SET.
63
Low frequency sounds are
distorted.
CROSS OVER in SUBWOOFER SET is
set incorrectly.
Set CROSS OVER correctly.
63
On-screen display does not
appear.
The OSD video pin cable is not
connected properly.
Connect the cable properly.
15
This unit does not operate
properly.
The internal microcomputer has been
frozen by an external electric shock
(such as lightning or excessive static
electricity) or by a power supply with
low voltage.
Disconnect the AC power supply cable
from the outlet and then plug it in again
after about 30 seconds.
There is noise interference from
digital or high-frequency
equipment.
This unit is too close to the digital or
high-frequency equipment.
Move this unit further away from such
equipment.
This unit does not output effect
sounds properly.
The original source includes surround
effects.
Disable surround effect settings on this
unit.
My beam auto-adjust function
does not work.
The listening room is too noisy. Keep the listening room as quiet as
possible.
Try manual adjustment.
48
The sound reflectivity of the listening
room is too much.
Set REFLECTING to HI ECHO.
64
The remote control may be operated
outside of the remote control operation
range.
The remote control will function within a
maximum range of 6 m (20 ft) and no
more than 30 degrees off-axis from the
front panel.
22
01EN_YSP-900_UAB_EN.book Page 83 Thursday, February 22, 2007 2:07 PM
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YSP-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YSP-900 in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YSP-900

Yamaha YSP-900 User Manual - English, German - 539 pages

Yamaha YSP-900 User Manual - German - 95 pages

Yamaha YSP-900 User Manual - Dutch, French - 539 pages

Yamaha YSP-900 User Manual - Italian - 362 pages

Yamaha YSP-900 User Manual - Swedish - 539 pages

Yamaha YSP-900 User Manual - Spanish - 362 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info