62385
86
Zoom out
Zoom in
Previous page
1/96
Next page
TROUBLESHOOTING
82 En
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, set this unit to the standby mode, disconnect the power supply cable and contact
the nearest authorized YAMAHA dealer or service center.
General
TROUBLESHOOTING
Problem Cause Remedy
See
page
This unit fails to turn on when
STANDBY/ON is pressed, or enters
the standby mode soon after the
power has been turned on.
The power supply cable is not firmly
connected to the AC wall outlet.
Connect the power supply cable firmly to
the AC wall outlet.
21
This unit has been exposed to a strong
external electric shock (such as lightning
and strong static electricity).
Set this unit to the standby mode,
disconnect the power supply cable, plug
it back in after 30 seconds, then use it
normally.
This unit suddenly enters the
standby mode.
The internal temperature becomes too
high and the overheat protection circuitry
has been activated.
Wait about 1 hour for this unit to cool
down and then turn it back on.
The sleep timer has turned the unit off. Turn on the power, and play the source
again.
No sound. Incorrect input or output cable
connections.
Connect the cables properly. If the
problem persists, the cables may be
defective.
14
No appropriate input source has been
selected.
Select an appropriate input source with
INPUT or the input selector buttons.
37
The volume is turned down. Turn up the volume.
39
The sound is muted. Press MUTE or VOLUME +/– on the
remote control to resume audio output
and then adjust the volume level.
39
Signals this unit cannot reproduce (such
as PCM signals with more than 96 kHz
of sampling frequency) are being
received from source component.
Play a source whose signals can be
reproduced by this unit.
Change the system settings of the source
component.
The sound suddenly goes off. The sleep timer has turned the unit off. Turn on the power, and play the source
again.
The sound is muted. Press MUTE or VOLUME +/– on the
remote control to resume audio output
and then adjust the volume level.
39
No sound from the effect
channels.
You are playing back the source or
program in the stereo mode or my beam
mode.
Press one of the beam mode buttons on
the remote control to select a multi-
channel playback mode and then try to
play back the source or program once
more.
40
No sound from the center channel. The output level of the center channel is
set to minimum.
Raise the level of the center channel.
68
No sound from the surround
channels.
The output level of the surround
channels is set to minimum.
Raise the output level of the surround
channels.
68
No sound from the subwoofer. BASS OUT in SUBWOOFER SET is set
to FRONT.
Select SWFR.
63
The source does not contain low bass
signals.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YSP-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YSP-900 in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YSP-900

Yamaha YSP-900 User Manual - English, German - 539 pages

Yamaha YSP-900 User Manual - German - 95 pages

Yamaha YSP-900 User Manual - Dutch, French - 539 pages

Yamaha YSP-900 User Manual - Italian - 362 pages

Yamaha YSP-900 User Manual - Swedish - 539 pages

Yamaha YSP-900 User Manual - Spanish - 362 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info