3. Performance Category/Name
Performance Category
A two-letter abbreviation of the Performance Category
is shown to the left of the Performance Name. This
gives you a rough idea of the Performance’s sound.
Performance Name
The name of a Performance can consist of up to 10
characters.
4. Knob Parameter Display
This shows the function/Parameter value assigned to
each knob ([A] to [C] and [1]/[2]).
Setting/Viewing Knob Parameters
In Performance Play Mode, you can use Knobs [A]
to [C] and Knob [1]/[2] to adjust parameters
assigned to them. When you use each knob, the
value of its assigned parameter is displayed briefly
([knob [A] to [C]).
Details about assigning parameters to Knobs [A] to
[C] are given on Pages 41, 129. Details about
assigning parameters to Knob [1]/[2] are given on
Pages 42, 69.
Setting/Viewing Octave and MIDI Transmit Channel Parameters
In Performance Play Mode, the current Octave and MIDI
Transmit Channel settings are shown while you hold
down the [SHIFT] key. The display varies, depending on
whether Master Keyboard Mode is on or off.
Details about Master Keyboard Mode are given on Page 108.
Master Keyboard Mode is off
Use Knob [A] while holding down the [SHIFT] key
to select the MIDI Transmit Channel (1 to 16).
Master Keyboard Mode is on
Use Knob [B]/[C]/[1]/[2] while holding down the [SHIFT]
key to select the MIDI Transmit Channel (1 to 16).
The notes you play in Performance Play Mode will
be transmitted on this MIDI channel.
When the master keyboard mode is turned off, you
can use the MIDI Ch screen in Utility Mode to set
MIDI transmission channels (Page 130).
