555608
40
Zoom out
Zoom in
Previous page
1/382
Next page
38 En
Troubleshooting
Tuner
There is a lack of bass
and no ambience.
The + and – wires are connected in
reverse at the amplifier or the speakers.
Connect the speaker wires to the correct + and –
phase.
10
A “humming” sound
can be heard.
Incorrect cable connections. Connect the audio plugs firmly. If the problem
persists, the cables may be defective.
10
No connection from the turntable to the
GND terminal.
Make the GND connection between the turntable and
this unit.
10
The sound is
degraded when
listening with the
headphones
connected to the CD
player or the tape
deck connected to
this unit.
The power of this unit is turned off, or this
unit is set to standby mode.
Turn on the power of this unit.
15
Problem Cause Remedy
See
page
Problem Cause Remedy
See
page
FM
FM stereo
reception is
noisy.
The particular characteristics of the FM
stereo broadcasts being received may
cause this problem when the transmitter is
too far away or the antenna input is poor.
Check the antenna connections.
Try using a high-quality directional FM antenna.
12
Switch to monaural mode.
17
There is
distortion, and
clear reception
cannot be
obtained even
with a good FM
antenna.
There is multipath interference. Adjust the antenna position to eliminate the multipath
interference.
The desired
station cannot
be tuned in
with the
automatic
tuning method.
The signal is too weak. Try using a high-quality directional FM antenna.
12
Try using the manual tuning method.
17
FM/
AM
NO PRESETS
is displayed.
No preset stations are registered. Register stations you want to listen to as preset
stations before operation.
18
AM
The desired
station cannot
be tuned in
with the
automatic
tuning method.
The signal is weak or the antenna
connections are loose.
Tighten the AM antenna connections and orient it for
the best reception.
Try using the manual tuning method.
17
Automatic
station preset
does not work.
Automatic station preset is not available
for AM stations.
Use manual station preset.
18
There are
continuous
crackling and
hissing noises.
The noises may result from lightning,
fluorescent lamps, motors, thermostats or
other electrical equipment.
Try using an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
There are
buzzing and
whining noises.
A TV set is being used nearby. Move this unit away from the TV set.
40


Need help? Post your question in this forum.

Forumrules
1

Forum

yamaha-r-n301

Reset search

  • After a power cut, I cannot get my Yamaha Natural Sound Network Receiver R-N301 off 'standby'. How can I turn it on again - it will not come off standby when I push the ON button?

    Thank you
    Paul Submitted on 1-12-2021 at 12:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha R-N301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha R-N301 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info