555608

Yamaha R-N301 Manual

36
Zoom out
Zoom in
Previous page
1/382
Next page
34 En
Configuring various functions (Setup menu)
■ Network Name
Edits the network name (the unit’s name on the network)
displayed on other network devices.
1 Select “Network Name”.
2 Press ENTER to enter the name edit display.
3 Use the cursor keys (D / E) to move the edit
position and the cursor keys (B / C) to select
a character.
4 To confirm the new name, press ENTER.
5 To exit from the menu, press SETUP.
■ Update
Updates the firmware via the network.
Adjusting the high and low frequency response.
Adjusting the sound output balance of the left and right
speakers to compensate for sound imbalance caused by
speaker locations or listening room conditions.
Control range
L+10 to R+10
y
For details, refer to the “Adjusting the speaker balance” (p.16).
Sets the maximum volume to prevent excessive loudness.
Setting range
1 to 99 (1 step increments), Max
Default
Max
Sets the initial volume when the receiver is turned on.
Setting range
Off, Mute, 1 to 99 (1 step increments), Max
Default
Off
Configures the DC OUT jack setting.
PowerMode
Selects how to supply power to the Yamaha AV accessory
connected to the DC OUT jack.
Perform
Update
Starts the process to update the unit’s firmware.
For details, see “Updating the unit’s firmware via
the network” (p.36).
Version
Displays the version of the firmware installed on
the unit.
ID Displays the system ID number.
SP A
¡ Network Name
Network
SP A
R-N301 XXXXX
Network
Network name
SPA
R-N301 XXXXX›
Network
Tone Control
Bass
When you feel there is not enough bass (low
frequency sound).
Control range: –10 to +10 (20 Hz)
Treble
When you feel there is not enough treble (high
frequency sound).
Control range: –10 to +10 (20 kHz)
Balance
Max Volume
Initial Volume
DC OUT
Con
(default)
Supplies power through the DC OUT jack
continuously regardless of the power state (on/
standby) of the unit.
Sync
Supplies power through the DC OUT jack only
when the unit is turned on.
… 36 …


Need help? Post your question in this forum.

Forumrules
1

Forum

yamaha-r-n301

Reset search

  • After a power cut, I cannot get my Yamaha Natural Sound Network Receiver R-N301 off 'standby'. How can I turn it on again - it will not come off standby when I push the ON button?

    Thank you
    Paul Submitted on 1-12-2021 at 12:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha R-N301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha R-N301 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info