555608
35
Zoom out
Zoom in
Previous page
1/382
Next page
33 En
Configuring various functions (Setup menu)
English
ADVANCED
OPERATION
Configures the network settings.
Information
Displays the network information on the unit.
IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Manual network settings
1 Set “DHCP” to “Off”.
2 Use the cursor keys (B / C) to select a
parameter type.
3 Use the cursor keys (D / E) to select the edit
position.
(Example: IP address setting)
Use the cursor keys (D / E) to switch between
segments (Address1, Address2...) of the address.
4 Use the Cursor keys (B / C) to change a
value.
5 To exit from the menu, press SETUP.
MAC Filter
Sets the MAC address filter to limit access to the unit from
other network devices.
Filter
Enables/disables the MAC address filter.
MAC address filter settings
1 Set “Filter” to “On”.
2 Use the cursor keys (B / C) to select an MAC
address number (01 to 10).
3 Use the cursor keys (D / E) to move the edit
position and the cursor keys (B / C) to select
a value.
4 To exit from the menu, press SETUP.
y
When using “AirPlay” (p.27) and “DMC Control” (p.33), you
cannot limit access from network devices regardless of the MAC
address filter.
DMC Control
Selects whether to allow DLNA-compatible Digital Media
Controller (DMC) to control playback.
y
A Digital Media Controller (DMC) is a device that can control
other network devices through the network. When this function is
enabled, you can control playback of the unit from DMCs (such
as Windows Media Player 12) on the same network.
Net Standby
Selects whether the unit can be turned on from other
network devices (network standby).
Network Setup
NewFwAvailable
Appears if an update for this unit’s firmware is
available (p.36).
Status The connection status of the NETWORK jack
MAC MAC address
IP IP address
Subnet Subnet mask
Gateway The IP address of the default gateway
DNS(P) The IP address of the primary DNS server
DNS(S) The IP address of the secondary DNS server
vTunerID The ID of the Internet radio (vTuner)
Off
Does not use a DHCP server. Configure the
network parameters manually. For details, see
“Manual network settings”.
On (default)
Uses a DHCP server to automatically obtain the
unit’s network parameters (such as IP address).
Address Specifies an IP address.
Subnet
Mask
Specifies a subnet mask.
Default
Gateway
Specifies the IP address of the default gateway.
DNS
Server(P)
Specifies the IP address of the primary DNS
server.
DNS
Server(S)
Specifies the IP address of the secondary DNS
server.
SP A
¡ Address1••192›
Network
Off (default) Disables the MAC address filter.
On
Enables the MAC address filter. In “MAC
Address 01–10”, specify the MAC addresses of
the network devices that will be permitted access
to the unit.
Disable Does not allow DMCs to control playback.
Enable
(default)
Allows DMCs to control playback.
Off (default) Disables the network standby function.
On
Enables the network standby function. (The unit
consumes more power than when “Off” is
selected.)
35


Need help? Post your question in this forum.

Forumrules
1

Forum

yamaha-r-n301

Reset search

  • After a power cut, I cannot get my Yamaha Natural Sound Network Receiver R-N301 off 'standby'. How can I turn it on again - it will not come off standby when I push the ON button?

    Thank you
    Paul Submitted on 1-12-2021 at 12:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha R-N301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha R-N301 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info