669113
84
Zoom out
Zoom in
Previous page
1/94
Next page
82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Appendix
The maximum of 255 “banks” of data has been exceeded (one pad contains one “bank”).
Clear all unnecessary pads and voice data before attempting to sample more data.
You have attempted to map or tune a pad or entering an original voice name that contains
no sampled voice data.
You have attempted to clear, record, or edit a pre-programmed disk voice file. In some
cases pre-programmed sampled voices (“Protected Voices”) can only be loaded.
You have attempted to map a pad to key to which another pad is already mapped. Map
either pad to a different key.
The wave RAM memory is full and can accept no more sampled voice data (the wave RAM
is 1,020 kilobytes). Clear all unnecessary pads and voice data before attempting to sample
more data.
You have inserted the wrong disk or a disk that does not contain the required data. Large
sampled voice data files may span more than one disk, and these must be inserted in the
correct order when loading the file. Check the disk number and try again.
No Bank
No Wave Data
Digital Sampling-related Error Messages (PSR-2700)
Wave Ram Full
Protected Voice
Same Note
Wrong Disk
Other Error Messages
You have pressed a button that can not be used in the current mode. Read the instructions
for the function you are using carefully, and use appropriate function button.
IllegalOperation
The PSR-1700/2700 recording memory has become full while recording Song Memory,
Custom Accompaniment, or Multi Pad data. Save data you want to keep to disk and clear
all unnecessary data from memory to make more room.
Memory Full
System Reset Procedure
All internal memory settings are retained in memory even when the power switch is turned OFF as long as a
good set of backup batteries is present or the AC plug is connected. You can, however, restore the factory default
settings by following the procedures outlined below.
–+
RESET
POWER
ON/ OFF
ZPress the [POWER] switch to turn the PSR-1700/PSR-2700 power OFF.
XTurn the power back ON while holding both the [+] and [–] buttons.
Backup RAM Clear will appear on the LCD display panel while the
data is being reset.
IMPORTANT
Executing the System Reset function will erase all internal
memory settings
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-1700 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info