Manual Yamaha P-150 (page 54 of 87) (English)

588673

Zoom out

Zoom in

1/87

■ Panel Switch (PS)

The Panel Switch function lets you assign a function to each

of the two Panel Switches for realtime control of an external

MIDI sequencer.

This gives you the flexibility to send Start, Stop or Continue

commands to external devices like sequencers and rhythm

programmers from the P-150’s panel, i.e., you can start and

stop the external device simply by pressing the [PS]

switches.

● PS1 ASSIGN (Off, Start, Continue, Stop)

When set to Off, the [PS1] will have no specific Play function. When set to

Start, Continue or Stop, you can control an external MIDI device by

pressing [PS1]. (The default setting for [PS1] is Start.)

● PS2 ASSIGN

Same as for PS1 ASSIGN, above. (The default setting for [PS2] is Stop.)

If you select Sys for CONTROL in the Performance Enable function

(System menu), the Panel Switch assignment you have previously set for

the currently selected Performance may actually be different, since the

current setting (System setting) in the Voice Play mode will be active. You

can change the System setting, and you can easily find which setting

(Sys or Perf) is selected in the Performance Enable function, as the letter

P will display to the left of the page number if Perf is selected.

■ Name

The Name function lets you input a name (up to 16

characters in length) for your Performances.

● PERFORMANCE NAME

The available characters include upper and lower case Roman letters,

numbers 0 ~ 9, a space and various symbols. Position the cursor with the

[1]/[q] buttons and choose the desired character with the [-1/NO]/[+1/YES]

buttons or the [DATA ENTRY] slider.

, ! , " , # , $ , % , & , ' , ( , ) ,

* , + , , , - , . , / , 0 ~ 9 ,

: , ; , < , = , > , ? , @ , A ~ Z ,

[ , , ] , ^ , _, ` , a ~ z

{ , | , } , › , ‹

(Space)

EDIT MODE

■ Organ Combination

The Organ Combination function lets you freely edit the

Organ 1 voice. This feature gives you considerable control

over the timbre and characteristics of the organ sound, so

that the range of possibilities are practically limitless.

With this feature you can literally recreate all of the classic

organ sounds, from theatre organ to rock and jazz organ, by

adjusting the flute footage levels and the attack settings, just

like on conventional organs.

To edit the organ sound, you must first select the Organ1

voice before entering Edit mode. Otherwise the CANNOT

EDIT message will display when you select the Organ 1

Combination function in Edit mode. (If this happens, simply

exit Edit mode, select the Organ 1 voice, and then reenter

Edit mode.)

● FOOTAGE (16’, 8’, 5-1/3’, 4’, 2-2/3’, 2’, 1-1/3’, 1’)

There are eight flute footages. The larger footages generate the

bass characteristics of the sound, the smaller footages generate

the treble characteristics of the sound, and those footages in

between generate the mid-range characteristics of the sound.

You can adjust the volume level of each flute footage between 0

(no volume) and 7 (maximum volume).

When only the lowest or highest footage is activated, some notes which

exceeds the legal range will not produce any sound.

● RESPONSE, ATTACK (4’, 2-2/3’, 2’, Length, Mode)

The left-most parameter, RSP (Response) determines how fast

the overall organ combination (footages in page 1) volume

reaches maximum level, between a range of 0 (fastest) and 7

(slowest). There are three Attack footages which determine the

character of the percussive portion of the organ voice. You can

adjust the volume level of each Attack footage between 0 (no

volume) and 7 (maximum volume).

PS1 ASSIGN 1

start:FA

PERF.NAME 1

PERFORMANCE<***>

COMBI. 16'=7 1

■ ■ ■ ■ ■ ■ ■ ■

16' 8' 5-1/3' 4' 2-2/3' 2' 1-1/3' 1'

COMBI. RESP.=7 2

RSP ■ ■ ■ ■ ■ E

Response

PS2 ASSIGN 2

stop:FC

COMBI. LENG.=3 2

ATK ■ ■ ■ ■ ■ E

Attack Length

COMBI. 4'=7 2

ATK ■ ■ ■ ■ ■ E

4' 2-2/3' 2'

Attack Footages

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha P-150 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha P-150 Manual

Product: