571282
77
Zoom out
Zoom in
Previous page
1/86
Next page
MOTIF XF Owner’s Manual
77
Installing Optional Hardware
4-1 Insert the Module vertically in the slot and face the screws
(of the Module) to the female screws respectively.
NOTE
Either slot can be inserted.
4-2 Press the top of the connector as shown, then push the
connector firmly into the slot.
4-3 Tighten each screw of the Memory Module to each female
screw of the MOTIF XF with your hand as shown below.
4-4 Attach another Module to the other slot, as desired.
5 Re-install the cover you removed in step 3, in
reverse order.
6 Check that the installed Module or Modules are
functioning properly.
6-1 Turn over the MOTIF XF so that the keyboard faces up
then turn the power on.
While launching, you will see the message indicating
that the Flash Memory Module cannot be recognized.
6-2 Press the [UTILITY] button to enter the Utility mode then
press the [F6] Flash button.
6-3 At the top left corner of this display, select the Flash
Memory Module number, “FL1” or “FL2.”
NOTE
The FL512M/FL1024M has been installed properly if an
“Unformatted” indication appears at the right of the slot
number on the display; “Unmounted” is shown if it is not.
If “Unmounted” is shown though you have installed the
Module, execute the instructions again from step 1 then
check whether or not the Module has been installed
properly.
6-4 Press the [SF3] Format button to execute the Format
operation.
NOTICE
If you installed a second Memory Module in addition to the first one,
do not format the first Memory Module. Doing so will erase your
important data in the first Memory Module. Before executing the
format operation, make sure that “Unformatted” is shown at right of
the Slot number (“FL1” or “FL2”) on the display.
6-5 If necessary, format the other Module by executing 6-3
and 6-4 again.
6-6 Check whether the Total size shown on the display is
correct or not.
When only one FL512M has been installed, “Total size
510M” is shown.
Removing the Module
1
Loosen both the screws.
NOTICE
If you cannot loosen the screw with your hand, use a Phillips
screwdriver. In this case, be careful NOT to scratch the circuit
board of the FL512M/FL1024M and MOTIF XF.
Since the screws can be removed from the module, be careful NOT
to drop them inside the instrument when loosening them.
2 Pull out the FL512M/FL1024M vertically.
3 Attach the cover to the bottom panel.
Locate the cover on the bottom panel so that screw holes
are fit then tighten the five screws with a Phillips screwdriver
to fix the cover.
Slot
Female screws
Serial No. seal
Press this section slightly
2
Rear side
Bottom
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XF8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XF8 in the language / languages: English as an attachment in your email.

The manual is 11,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XF8

Yamaha MOTIF XF8 User Manual - English - 53 pages

Yamaha MOTIF XF8 Installation Guide - English - 10 pages

Yamaha MOTIF XF8 Installation Guide - English - 6 pages

Yamaha MOTIF XF8 User Manual - German - 53 pages

Yamaha MOTIF XF8 Installation Guide - German - 10 pages

Yamaha MOTIF XF8 Installation Guide - German - 6 pages

Yamaha MOTIF XF8 User Manual - German - 84 pages

Yamaha MOTIF XF8 User Manual - Dutch - 84 pages

Yamaha MOTIF XF8 User Manual - French - 84 pages

Yamaha MOTIF XF8 Installation Guide - French - 10 pages

Yamaha MOTIF XF8 Installation Guide - French - 6 pages

Yamaha MOTIF XF8 User Manual - Italian - 84 pages

Yamaha MOTIF XF8 User Manual - Portuguese - 84 pages

Yamaha MOTIF XF8 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info