571282
75
Zoom out
Zoom in
Previous page
1/86
Next page
MOTIF XF Owner’s Manual
75
Installing Optional Hardware
FW16E
1 Turn the power of the MOTIF XF off, and
disconnect the AC power cord. Also, make sure to
disconnect the MOTIF XF from any connected
external devices.
2 Remove the cover for the FW16E from the rear
panel.
With the rear panel of this synthesizer facing you, remove the
two screws from the cover.
Important
Keep the removed screws in a safe place. They will be used when
installing the FW16E. Be careful not to misplace them. Keep the cover
and fixing screws in a safe place for future use.
CAUTION
After removing the cover, you will see the metal fittings at the bottom
of the opening. To avoid cutting or scraping your fingers, be careful
not to touch them when installing the FW16E.
3 Insert the FW16E along the guide rails.
Push the FW16E all the way into the slot so that the
connector at the end of the FW16E is correctly inserted into
the connector inside the slot.
4 Replace the cover with the two screws you
removed in step 2 above.
NOTICE
Malfunctions or incorrect operation may occur if the FW16E is not
properly fastened.
For information on connecting to a computer, refer to “Using
the IEEE1394 terminal” on page 57.
Guide rails
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XF8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XF8 in the language / languages: English as an attachment in your email.

The manual is 11,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XF8

Yamaha MOTIF XF8 User Manual - English - 53 pages

Yamaha MOTIF XF8 Installation Guide - English - 10 pages

Yamaha MOTIF XF8 Installation Guide - English - 6 pages

Yamaha MOTIF XF8 User Manual - German - 53 pages

Yamaha MOTIF XF8 Installation Guide - German - 10 pages

Yamaha MOTIF XF8 Installation Guide - German - 6 pages

Yamaha MOTIF XF8 User Manual - German - 84 pages

Yamaha MOTIF XF8 User Manual - Dutch - 84 pages

Yamaha MOTIF XF8 User Manual - French - 84 pages

Yamaha MOTIF XF8 Installation Guide - French - 10 pages

Yamaha MOTIF XF8 Installation Guide - French - 6 pages

Yamaha MOTIF XF8 User Manual - Italian - 84 pages

Yamaha MOTIF XF8 User Manual - Portuguese - 84 pages

Yamaha MOTIF XF8 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info