571272
257
Zoom out
Zoom in
Previous page
1/300
Next page
Reference Sampling Mode
Sampling Job mode
257
Owner’s Manual
04: Move This Job lets you move a sample contained in a
specified Key Bank to another Key Bank. This would be
useful for creating a new Waveform from the samples of
various other existing Waveforms.
After specifying the source Waveform and Key Bank as
well as the destination Waveform and Key Bank, press
the [ENTER] button to execute the Move Job.
nIf the last remaining sample is moved from the source
Waveform, the source Waveform itself is deleted.
05: Normalize This Job maximizes (normalizes) the overall level of the
specified sample. The “100” (100%) setting is a quick
and convenient way to boost the level of an entire
sample, to make it as loud as possible without distorting.
After specifying the Waveform and Key Bank, then press
the [ENTER] button to execute the Normalize Job.
Ratio Specifies the post-normalization sample level. A setting of 100% maximizes the level so that the highest peak level in
the sample is just below clipping (maximum digital signal level). Settings below 100% reduce the level of the sample
accordingly. Settings higher than 100% will raise the sample level above the maximum, producing deliberate
clipping.
Settings: 001 ~ 800%
06: Time-Stretch This Job lets you change the length of the sample without changing the pitch.
The basic steps in using this Job are the same as in 05: Normalize explained above.
Ratio Determines the length of post-process sample as a ratio of the length of the original sample (100%). Lower values
compress the sample, while higher values expand the sample.
Settings: 0~400%
Accuracy Determines the quality of the resulting sample by specifying which aspect of the original is to be emphasized: sound
quality or rhythmic feel.
Settings: sound4 - sound1, normal, rhythm1 - rhythm 2
sound4 - sound1 .............. These settings place emphasis on sound quality, with the “SOUND 4” setting producing the highest sound
quality.
normal .............................. Produces an optimum balance of sound quality and rhythmic feel.
rhythm1 - rhythm 2 ........... These settings place emphasis on rhythmic feel, with the “Rhythm 2” setting producing the most accurate
rhythmic feel.
07: Convert Pitch This Job lets you change the pitch of the sample without changing the length.
The basic steps in using this Job are the same as in 05: Normalize explained above.
Pitch Determines the amount and direction of pitch shift in semitone increments.
Settings: -12 ~ 0 ~+12
Fine Determines the amount and direction of fine pitch shift in cent increments (1 cent = 1/100th of a semitone).
Settings: -50 ~ 0 ~ +50
08: Fade In/Out This Job lets you create fade-ins and fade-outs for the sample.
The basic steps in using this Job are the same as in 05: Normalize explained above.
Type Determines the type of level fade: fade-in or fade-out.
Settings: in (fade-in), out (fade-out)
Source Waveform and Key Bank
Destination Waveform and Key Bank
Set the Waveform and Key Bank containing
the sample to be normalized.
Press the [ENTER] button to execute the job.
Press the [F5] (CANCEL) button
to cancel the operation.
Press the [F6] (OK) button to assign the
normalized sample to the specified Key Bank.
Press the [ENTER] button to execute the operation.
If you are not satisfied with the results, change the Ratio
value and press the [ENTER] button again. This
automatically reverts back to the original settings and
executes the operation again with the new settings.
Source Wave
Ratio = less than 100%
Ratio = 100%
Ratio = more than 100%
257


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info