The Song Mixing Job mode features several basic operations, such as Initialize and Copy. After setting parameters as required from the
selected display, press the [ENTER] button to execute the Job.
nAmong the Audio Parts shown in the Song Mixing Job display, Audio Part 1 indicates the A/D Input Part. When the optional AIEB2 has been installed, Audio
Part 2 indicates the AIEB2 Input Part. When the optional mLAN16E has been installed, Audio Parts 2 - 5 are mLAN Input Parts.
[F3] EQ (Equalizer)
From this display you can set parameters related to the Part EQ (page 178).
The parameters are the same as in Performance Part Edit. See page 218.
[F4] TONE
[SF1] TUNESame as in Performance Part Edit. See page 218.
[SF2] FILTERSame as in Performance Part Edit. See page 218.
nThe FEG Depth setting is not available for Multi-part Plug-in Parts 17 - 32 and Plug-in Parts 1 - 3.
[SF3] FEG
(Filter Envelope Generator)
From this display you can set the FEG (Filter Envelope Generator) parameters for each Part. The parameters offset
the same parameters of the assigned Voice set in the Voice (Element) Edit mode (page 198).
The parameters are the same as in Performance Part Edit. See page 218.
nThe FEG setting is not available for Multi-part Plug-in Parts 17-32, Plug-in Parts 1-3, or Parts to which Drum Voices have been
assigned.
[SF4] AEG
(Amplitude Envelope Generator)
From this display you can set the AEG (Amplitude Envelope Generator) parameters for each Part. The parameters
offset the same parameters of the assigned Voice set in the Voice (Element) Edit mode (page 200).
The parameters are the same as in Performance Part Edit. See page 219.
nThe Sustain setting is not available for Multi-part Plug-in Parts 17 - 32, Plug-in Parts 1 - 3 or Parts to which Drum Voices have
been assigned.
nThe Release setting is not available for Parts to which Drum Voices have been assigned.
[F5] RCV SW (Receive Switch)
From this display you can set how each individual Part responds to various MIDI data, such as Control Change and Program Change messages. When the
relevant parameter is set to “on,” the corresponding Part responds to the appropriate MIDI data.
Note that two different display types listed below are provided and you can switch between them by pressing the [SF5] button. Each display type features the
same settings in a different format; use the type you feel most comfortable with.
• Display showing four Parts
This display type shows the Receive Switch status for four Parts at a time. Set the desired Part on or off, for the corresponding MIDI data type. To view and edit
another set of four Parts, press the appropriate [NUMBER] button, [1] to [16].
Keep in mind that since all the available parameters cannot be simultaneously displayed, you will need to use the cursor controls to scroll the display in order to
see and set the other parameters.
• Display showing all parameters for one Part
This display type shows all of the Receive Switch settings for a single selected Part. Set the desired MIDI data type on or off for the selected Part. To select other
Parts, use the NUMBER [1] - [16] buttons (making sure that the [TRACK SELECT] button is on).
Song Mixing Job mode[SONG] → Song selection → [MIXING] → [JOB]
[F1] INIT (Initialize)
This function lets you reset (initialize) all Song Mixing parameters to their default settings. It also allows you to selectively initialize certain parameters, such as
Common settings, settings for each Part, and so on — very useful when creating a completely new Song Mixing program from scratch.
Type of parameter to be initialized: All, Common (Common parameter settings for the selected Song Mixing), Part 1~16, PLG 1~3, Audio1~5
[F2] RECALL (Edit Recall)
If you are editing a Song Mixing program and select a different program without storing your edited one, all the edits you’ve made will be erased. If this happens,
you can use Edit Recall to restore the Song Mixing program with your latest edits intact.
[F3] COPY
From this display you can copy Part parameter settings from any Song Mixing program including the
currently edited (but not yet stored) one to a particular Part of the Song Mixing program you are
editing. This would come in handy when you want to use some settings from another program.
Source songSelect a Song and Part to be copied. You can specify “Current” (the Song Mixing program you are editing and have
not yet stored) as a Source Song.
Part to be copied (Type): Part 1~16, PartP1~P3 (Plug-in Part 1~3), PartA1~A5 (Audio Part 1~5)
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
