These parameters are for editing the individual Parts that make up a Song Mixing. Press the [F6] button to switch among the various Part
displays — the display for Parts 1 - 16 to which the internal Voices are assigned, the display for Multi-part Plug-in Parts (17 - 32) to which the
PLG100-XG voices are assigned, and the display for Plug-in Parts (PLG1 - 3) to which the Plug-in Voices of the single part Plug-in board are
assigned.
nPlease note that the Multi-Part Plug-in Part (17~32) settings apply not to one individual Song but to all 64 Songs.
[F5] AUDIO IN
From this display, you can set parameters related to the Audio Input Part in the Song mode.
The parameters are the same as in Performance Common Edit. See page 214.
[F6] EFFECT
nFor information on the effect connections in the Song mode, see page 180.
[SF1] CONNECTThis display gives you comprehensive control over the effect connections.
The parameters are the same as in Performance Common Edit. See page 215.
[SF2] INS SW (Insertion Switch)The Insertion Effects can be applied to up to eight parts. This display lets you set to which parts the Insertion Effects
are applied.
[SF3] PLG EF (Plug-in Effect)This display lets you set the Plug-in Insertion Effect related parameters when the Effect Plug-in Board PLG100-VH
has been installed. For details on each parameter, refer to the Owner’s Manual included with the PLG100-VH.
[SF4] REVERBThe number of parameters and values available differs depending on the currently selected effect type. For more
information, see the Effect Type List in the separate Data List booklet.
[SF5] CHORUS
Part Edit[SONG] → Song selection → [MIXING] → [EDIT] → Part selection
[F1] VOICE
[SF1] VOICEDetermines the Voice for each Part. For details, see page 102.
nWhen the cursor is located on the Bank, you can select a Voice (with the exception of Sample Voices, Mixing Voices, and
Voices of Multi-part Plug-in Parts) via the method explained in the Quick Guide on page 102.
[SF2] MODE
Mono/PolyDetermines the playback method of the Voice for each Part — monophonic (single notes only) or polyphonic
(multiple notes).
Settings:mono, poly
nThis parameter is not available for the part to which a Drum Voice is assigned.
ArpSwitch (Arpeggio Switch)Determines whether Arpeggio is on or off for the currently selected Part.
Settings:on, off
nArpeggio Switch is applied to only one Part at the same time. It cannot be applied to multiple Parts simultaneously.
nArpeggio Switch is not available for the Multi-part Plug-in Parts 17~32.
ReceiveCh (Receive Channel)Determines the MIDI receive channel for the selected Part. Since MIDI data may be coming from many channels at
once, you should set this to match the particular channel over which the desired controlling data is being sent.
Settings:01~16, off
[SF3] LIMITFrom this display you can determine the note range and velocity range for each Part.
The parameters are the same as in Performance Part Edit. See page 216.
[SF4] PORTA (Portamento)Determines the Portamento parameters for each Part.
The parameters are the same as in Performance Part Edit. See page 216.
nThe Mode setting is not available for the Multi Plug-in parts 17-32 and the Plug-in parts 1-3.
[SF5] OTHERSame as in Performance Part Edit. See page 217.
nFor Multi-part Plug-in Parts 17 - 32 and Plug-in Parts 1 - 3, Pitch Bend Upper and Lower become a single parameter: PB
Range. Upper and Lower values cannot be set independently for Plug-in Parts. See page 164.
[F2] OUTPUT
[SF1] VOL/PAN (Volume/Pan)Same as in Performance Part Edit. See page 217.
nThe Voice Element Pan setting is not available for Multi-part Plug-in Parts 17 - 32 and Plug-in Parts 1 - 3.
[SF2] EF SEND (Effect Send)Same as in Performance Part Edit. See page 217.
[SF3] SELECT (Output Select)From this display you can assign individual Parts to sound from independent output connectors (jacks).
The parameters are the same as in Performance Part Edit. See page 218.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
