Pressing the [F6] button lets you switch between Single Track recording and All Track recording.
Settings:tempo, scene, 1~16, multi
(Tempo)Determines the Song tempo.
Settings:001.0 ~300.0
Meas (Measure)Determines the measure from which Song recording will be started.
[F2] VOICE
In this display you can set the voice related parameters for the recording track. The settings here affect the Part for which the receive channel (set in the Mixing
mode) matches the transmit (output) channel of the recording track.
VoiceDetermines the voice used in the recording track. When the cursor is located here, you can select a voice by using
the BANK, GROUP, NUMBER buttons and the Category Search function (page 62). You can also select a Sample
Voice obtained via the Sampling function.
VolumeDetermines the volume of the recording track.
Settings:0 ~ 127
PanDetermines the stereo pan position of the recording track.
Settings:L63 (Left) ~ C (Center) ~ R63 (Right)
InsEF
(Insertion Effect Part Switch)Determines whether the Insertion effects are applied to the recording track or not.
Settings:on, off
(Tempo)Determines the Song tempo.
Settings:001.0 ~300.0
Meas (Measure)Determines the measure from which Song recording will be started.
[F3] ARP (Arpeggio)
From this display you can set parameters related to the Arpeggio of the recording track.
Bank, Ctgr (Category), TypeThese three parameters determine the Arpeggio Type. The three-letter prefix number before the Type name
indicates the number within the selected Category.
Settings:Refer to the separate Data List.
VelLimit (Velocity Limit)Determines the lowest and highest velocity which can trigger the Arpeggio playback. The Arpeggio plays when you
play notes at velocities within this range.
Settings:1 ~ 127
HoldDetermines whether the Arpeggio playback is “held” or not. When this is set to “on,” the Arpeggio cycles
automatically, even if you release your fingers from the keys, and it continues to cycle until the next key is pressed.
Settings:sync-off, off, on
nAbout sync-off, see page 191.
PartSw (Part Switch)Determines whether Arpeggio is on or off for the tone generator Part corresponding to the recording track.
Settings:off, on
Meas (Measure)Determines the measure from which Song recording will be started. This parameter is same as the Meas parameter
in the [F1] SETUP display.
[SF1] ARP1 (Arpeggio 1) - [SF5]
ARP5 (Arpeggio 5)
You can register the desired Arpeggio types to these buttons and call them up any time during your keyboard
performance. Refer to page 123 in the Quick Guide section.
[F4] RECARP (Record Arpeggio)
RecArp (Record Arpeggio)Determines whether the sequence data played by Arpeggio is recorded to the Song track or not. When this is set to
on, the played sequence data is recorded.
Settings:off, on
OutputSwitchDetermines whether the sequence data played by Arpeggio during recording is output via MIDI or not. When this is
set to on, the played sequence data by Arpeggio during recording is output via MIDI.
Settings:off, on
TransmitCh (Transmit Channel)Determines the MIDI transmit channel of the Arpeggio playback during recording.
Settings:1 ~ 16, KbdCh
[F5] CLICK
Pressing the [F5] button lets you turn the click sound (metronome) on/off for recording.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
