571272
184
Zoom out
Zoom in
Previous page
1/300
Next page
Basic Structure
About MIDI
184 Owner’s Manual
Mono (Control #126)
Performs the same function as when an All Sounds Off
message is received, and if the 3rd byte (mono number) is in
the range of 0 - 16, it sets the corresponding channel to Mono
Mode (Mode 4: m = 1).
Poly (Control #127)
Performs the same function as when an All Sounds Off
message is received, and sets the corresponding channel to
Poly Mode.
Program Change
Messages that determine which voice to select for each Part.
With a combination of Bank Select, you can select not only
basic voice numbers, but also variation voice bank numbers.
For a list of the Voices, see the separate Data List.
Pitch Bend
Pitch Bend messages are continuous controller messages
that allow the pitch of designated notes to be raised or
lowered by a specified amount over a specified duration.
Channel Aftertouch
Messages which let you control the sounds by the pressure
you apply to the keys after the initial striking of the keys, over
the entire channel.
This synthesizer does not transmit this data from the
keyboard; however, this synthesizer does properly respond to
this data when received from an external device.
Polyphonic Aftertouch
Messages which let you control the sounds by the pressure
you apply to the keys after the initial striking of the keys, for
each individual key. This synthesizer does not transmit this
data from the keyboard; however, the data is transmitted from
the internal sequencer.
SYSTEM MESSAGES
System messages are the data related to the overall system of
the device.
System Exclusive Messages
System Exclusive messages control various functions of this
synthesizer, including master volume and master tuning, tone
generator mode, effect type and various other parameters.
General MIDI (GM) System On (Song mode/Pattern only)
When “General MIDI system on” is received, the MOTIF ES
will receive the MIDI messages which are compatible with GM
System Level 1, and consequently will not receive NRPN and
Bank Select messages.
F0 7E 7F 09 01 F7 (Hexadecimal)
nMake sure that the interval between this message and the first note
data of the song is at least a quarter note or greater in length.
Master Volume
When received, the Volume MSB will be effective for the
System Parameter.
F0 7F 7F 04 01 ll mm F7 (Hexadecimal)
* mm (MSB) = appropriate volume value, ll (LSB) = ignored
System Realtime Messages
These messages control the sequencer, that is to say Song
and Pattern.
Active Sensing (FEH)
Once FEH (Active Sensing) has been received, if no MIDI
data is subsequently received for longer than an interval of
approximately 300 msec, the MOTIF ES will perform the same
function as when All Sounds Off, All Notes Off, and Reset All
Controllers messages are received, and will then return to a
status in which FEH is not monitored
Timing Clock (F8H)
This message is transmitted with a fixed interval (24 times per
1/4 note) to synchronize connected MIDI instruments.
You can select whether the sequencer block uses the internal
Timing Clock, or external Timing Clock messages received
via MIDI IN by setting the MIDI Sync parameter: [UTILITY]
[F5] MIDI [SF3] SYNC MIDI Sync.
Start (FAH)
This message lets the MIDI sequence data start playing back
from the beginning. This message will be transmitted when
pressing the [F] (Play) button at the top of the Song or
Pattern.
Continue (FBH)
This message lets the MIDI sequence data start playing back
from the current song position. This message will be
transmitted when pressing the [F] (Play) button at the
middle of the Song or Pattern.
Stop (FCH)
This message causes MIDI sequence data (song) to stop
playing back. This message will be transmitted when
pressing the [] (Stop) button during playback.
nYou can select whether this synthesizer will transmit Timing Clock,
Start, Continue, and Stop messages by setting the SeqCtrl parameter:
[UTILITY] [F5] MIDI [SF3] SYNC SeqCtrl.
System Common Message
System Common messages also control the sequencer,
including Song Select and Song Position Pointer messages.
184


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info