Sampling is a powerful function that lets you bring your own recorded sounds – your voice, an instrument, rhythms, special
sound effects, etc. – into the system of this synthesizer, and play those sounds just like any other voices. These sounds, the
audio data you capture with the Sampling function, are referred to as “Samples.”
The data you create by Sampling differs depending on which mode you enter the Sampling mode from — the Voice/
Performance mode or the Song/Pattern mode. In this section, we’ll describe how to use the Sampling function from the Voice/
Performance mode in creating a User Voice.
nSee page 173 for instructions on using the Sampling function in the Song mode/Pattern mode.
In order to use the Sampling function, DIMM modules must be installed to the instrument. For details on installing DIMMs, see page 289.
Depending on the size of the audio (sample) data obtained via the Sampling function, you may not be able to save all of the desired data to a SmartMedia
card (maximum capacity: 128MB). For this reason, we recommend using a large-capacity USB storage device for your Sampling data.
Sampling your voice with a microphone and creating a Normal Voice
Follow steps #1 - 8 on page 72.
Type: sample
Source:A/D
Next:off
Mono/Stereo:L mono
Frequency:44.1k
For details about each parameter, see page 251.
nIf the Voice parameter above is set to “off,” you won’t be able to play
the sampled sound as a Voice after completing this operation.
However, you can call up the sampled sound by selecting a
Waveform. For details on how to select a Waveform, see .
1Connect a microphone to the instrument.
2Press the [INTEGRATED SAMPLING] button in
the Voice mode or Performance mode to enter
the Sampling mode.
3Press the [F2] SOURCE button to call up the
display for setting the Sampling Source, then set
the parameters as shown below.
VOICE
SONG
PERFORMMASTER
PATTERNFILE
MODE
SEQUENCER
INTEGRATED
SAMPLINGMIXINGUTILITY
DEMO
4Press the [F1] DEST button to call up the display
for setting the Sampling Destination, then set the
parameters as described below.
WaveformDetermines the Waveform number. Select a number
which has no data ([--- : -----------] is indicated). For
details about the Waveform, see page 173.
KeybankHere, set this parameter to “C3.” After the Sampling is
completed, you can hear the sampled sound by
pressing the note set here. For details about the
Keybank, see page 173.
PartThis is available when entering the Sampling mode
from the Performance mode. This parameter
determines the Performance Part to which the Voice
(below) created by sampling is assigned.
VoiceSet the Bank to “USR1” or “USR2” (one of the User
Normal Voice Banks), then select a User Normal Voice
Number. After the Sampling is completed, you can hear
the created Voice by selecting the Voice number set
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
