571272
92
Zoom out
Zoom in
Previous page
1/300
Next page
Editing a Performance
92 Owner’s Manual
Quick Guide — Advanced Course
After the Performance has been stored, a “Completed” message
appears and operation returns to the Performance Play display.
Keep in mind that the Store operation may take a short time to complete,
during which an “Executing.. or “Please keep power on” message may be
shown. Never attempt to turn off the power while data is being written to
Flash ROM while such a message is displayed. Turning the power off in this
state results in loss of all user data and may cause the system to freeze (due
to corruption of data in the Flash ROM). This may also result in the MOTIF ES
being unable to properly start up the next time the power is turned on.
If you select another Performance without storing, the currently edited
Performance will be lost. Make sure to store the edited Performance before
selecting another Performance.
Saving the edited Performances to a
SmartMedia/USB storage device
Whether you are saving data to SmartMedia or a USB storage
device, the procedure is the same. Insert a SmartMedia card
(to the CARD slot) or connect the USB device and follow the
instructions below.
Refer to “Basic settings for using SmartMedia or a USB
storage device” on page 30.
Move the cursor to TYPE, then select a file type by using the
data dial, [INC/YES] and [DEC/NO] buttons. When Type is set
to “All,” execute the Save operation to save all the created
data, including the Performances as well as the Voices
assigned to them, as a single file (extension: W7A).
Move the cursor to the file name input location, then input a
file name. For detailed instructions on naming, refer to page
53 in the Basic Operation section.
If you are about to overwrite an existing file, the display
prompts you for confirmation. Press the [INC/YES] button to
execute the Save operation to overwrite the existing file, or
press the [DEC/NO] button to cancel it.
While the data is being saved, make sure to follow these precautions:
•Never remove or eject the media from the device (SmartMedia or USB
storage).
•Never unplug or disconnect any of the devices.
•Never turn off the power of the MOTIF ES or the relevant devices.
Loading the Performance data from the
SmartMedia/USB storage device
In the previous section, we saved Performance data as an
“All” file (extension: W7A) to a SmartMedia card or USB
storage device. Here, we’ll recall that Performance data and
load it to the instrument with the Load operation.
Refer to “Basic settings for using SmartMedia or a USB
storage device” on page 30.
4Press the [INC/YES] button to execute the Store
operation.
[FILE] [F2] SAVE
1Press the [FILE] button to enter the File mode,
then execute the basic settings.
2Press the [F2] SAVE button to call up the Save
display.
3Set the Type parameter to “All.”
EXIT ENTER
EXECUTE
DEC/NO INC/YES
CAUTION
CAUTION
4Input a file name.
5Press the [ENTER] button to execute the Save
operation.
[FILE] [F3] LOAD
1Press the [FILE] button to enter the File mode,
then execute the basic settings.
2Press the [F3] LOAD button to call up the Load
display.
File name
EXIT ENTER
EXECUTE
DEC/NO INC/YES
CAUTION
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info