652605
70
Zoom out
Zoom in
Previous page
1/86
Next page
MONTAGE Owner’s Manual
60
Troubleshooting
Playback continues without stopping.
When the [ARP ON/OFF] button is turned on, press it so that the button is turned off.
When in the Song display, press the [J] (Stop) button.
When the effect sound such as Delay continues, check the effect setting or select the Performance again.
When the click sound continues, check the following parameter setting. Set this parameter to something other than “always,”
since this setting always plays back the click sound regardless of the sequencer status.
Distorted sound.
Are the effect settings appropriate?
Use of an effect at certain settings may produce distortion.
Are the filter settings appropriate?
Excessively high filter resonance settings can cause distortion.
In case of Normal Part (AWM2) and Drum Part
In case of Normal Part (FM-X)
Are any of the following volume parameters set so high that clipping is occurring?
In case of Normal Part (AWM2) and Drum Part
In case of Normal Part (FM-X)
Sound is cut off.
Is the entire sound (via your keyboard playback and Song/Part/Arpeggio playback) exceeding the maximum polyphony (128
for each of AWM2 and FM-X) of the MONTAGE?
Only one note sounds at a time.
When this situation occurs, the Mono/Poly parameter in the current mode is set to “mono.
If you wish to play chords, set this parameter to “poly.”
Pitch or intervals are wrong.
Is the Master Tune parameter of each Part set to a value other than “0”?
Is the Note Shift parameter of each Part set to a value other than “0”?
In case of Normal Part (AWM2) and Drum Part
In case of Normal Part (FM-X)
[UTILITY] [Tempo Settings] Click “Mode
[EDIT] Part selection ELEMENT/OPERATOR [COMMON] [Effect]
[EDIT] Part selection Element/Key selection [Filter]
[EDIT] Part selection ELEMENT/OPERATOR [COMMON] [Pitch/Filter]
[UTILITY] [Settings] [Sound] Tone Generator “Volume”
[UTILITY] [Settings] [Audio I/O] “Output”
[EDIT] PART [COMMON] [General] “Volume
[EDIT] Part selection ELEMENT/OPERATOR [COMMON] [Part Settings] [General] “Volume
[EDIT] Part selection Element/Key selection [Amplitude] [Level/Pan] “Level”
[EDIT] Part selection Operator selection [Level] “Level”
[EDIT] Part selection ELEMENT/OPERATOR [COMMON] [Part Settings] [General] “Mono/Poly”
[UTILITY] [Settings] [Sound] Tone Generator “Tune
[EDIT] Part selection ELEMENT/OPERATOR [COMMON] [Part Settings] [Pitch] “Note Shift”
[EDIT] Part selection ELEMENT/OPERATOR [COMMON] [Part Settings] [Pitch] “Detune”
[EDIT] Part selection ELEMENT/OPERATOR [COMMON] [Pitch/Filter] [Pitch] “Note Shift”
[EDIT] Part selection ELEMENT/OPERATOR [COMMON] [Pitch/Filter] [Pitch] “Detune
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Montage 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Montage 8 in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info