652603
25
Zoom out
Zoom in
Previous page
1/86
Next page
MONTAGE Owner’s Manual
15
Setting Up
Auto Power Off function
To prevent unnecessary power consumption, this instrument
features an Auto Power Off function that automatically turns
the power off if the instrument is not operated for a specified
period of time.
Auto Power Off Setting
The amount of time that elapses before the power is
automatically turned off can be set.
Disabling Auto Power Off (simple method)
Turn the power on while holding down the lowest key on the
keyboard. An “Auto power off disabled” message appears
briefly and Auto Power Off is disabled. The setting is
retained even if the power is turned off.
NOTICE
Even when the power is turned off, electricity is still flowing to
the instrument at the minimum level. To shut off the electricity
completely, make sure you unplug the power cord from the
wall AC outlet.
Depending on the instrument status, the power may not turn
off automatically, even after the elapse of the specified period
of time. Always turn off the power manually when the
instrument is not in use.
When the instrument is not operated for a specified period of
time while connected to an external device such as an
amplifier, speaker or computer, make sure to follow the
instructions in the Owner’s Manual to turn off the power to the
instrument and the connected devices in the proper sequence,
in order to protect the devices from damage. If you do not
want the power to turn off automatically when a device is
connected, disable Auto Power Off.
The setting will revert to its default value if not backed up
before the power is turned off.
When Auto Power Off is set to “off,” the value will be retained
even if the backup data saved on another device is loaded to
the instrument. When Auto Power Off is set to something other
than “off,” the value will be overwritten with loaded data.
NOTE
The setting time is approximate.
To turn the power on after Auto Power Off has been executed,
press the [STANDBY/ON] switch.
When the factory settings are restored, the setting time is changed
to the default value (30 min.).
Adjusting the Master Volume
output
Adjust the overall level of this instrument by using the
[MASTER VOLUME] slider.
CAUTION
Do not listen with the headphones at high volume for long
periods of time. Doing so may cause hearing loss.
Restoring the initial factory
settings (Initialize All Data)
NOTICE
When the Initialize All Data operation is executed, all the
Performance, Song, and any system settings you created on the
Utility display will be erased. Make sure you are not overwriting
any important data. Be sure to save all important data to your
USB flash memory device before executing this procedure
(page 53).
1 Press the [UTILITY] button or touch the
UTILITY icon in the upper right of the screen
to call up the Utility display.
2 Touch the [Settings] tab in the left of the
screen and then touch the [System] tab.
The entire system setting display appears.
3 Touch [Initialize All Data] in the lower right of
the screen.
The display prompts you for confirmation. To cancel this
operation, touch the [Cancel No] in the screen or press
the [DEC/NO] button on the panel.
4 Touch [Yes] in the screen or press the [INC/
YES] button to execute the Initialize All Data
operation.
Instructions:
[UTILITY] [Settings] [System] [Auto
Power Off]
Setting Value (min.):
off (disables Auto Power Off), 5, 10, 15, 30,
60, 120
Default Setting (min.):
30
Max.
Min.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Montage 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Montage 6 in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info