652603
24
Zoom out
Zoom in
Previous page
1/86
Next page
MONTAGE Owner’s Manual
14
Power Supply
Connect the supplied AC power cord in the following order.
Make sure the [STANDBY/ON] switch on the instrument is set
to the Standby position.
1 Connect the supplied power cord to the AC IN
on the instruments rear panel.
2 Connect the other end of the power cord to
an AC outlet.
NOTE
Follow this procedure in reverse order when disconnecting the power
cord.
WARNING
Use only the AC power cord supplied with your instrument.
The use of an inappropriate replacement can lead to
overheating or electric shock.
The power cord supplied with your instrument must not be
used with other electrical equipment. Failure to observe this
precaution can result in the equipment being damaged or
cause a fire.
Make sure your instrument the voltage requirement for the
country or region in which it is being used.
CAUTION
The instrument remains charged and draws a small amount of
power even when the [STANDBY/ON] switch is set to the Standby
position. If you intend not to use it for an extended period of
time, therefore, make sure to unplug the power cord from the
wall outlet.
Connecting Speakers or
Headphones
Since the instrument has no built-in speakers, you will need
to monitor the sound of the instrument by using external
equipment. Connect a set of headphones, powered
speakers, or other playback equipment as illustrated below.
When making connections, be sure that your cables have
the appropriate ratings.
Powering Up the System
Make sure the volume settings of the instrument and external
devices such as powered speakers are turned to the
minimum before turning the power on. When connecting the
instrument to powered speakers, turn on the power switch of
each device in the following order.
When turning the power on:
First, the instrument (the display will turn on and the buttons
will light), then the connected powered speakers.
When turning the power off:
First, the connected powered speakers, then the instrument
(the display will turn off and the buttons will turn off).
Keep in mind that the [STANDBY/ON] switch is located at the
right side (from the view of the keyboard) of the AC IN socket
on the rear panel of the instrument.
Setting Up
Rear panel
AC IN
Power cord (included)
Powered speaker
(left)
Powered speaker
(right)
Headphones
OUTPUT L/MONO OUTPUT R
PHONES
AC IN
[STANDBY/ON]
switch
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Montage 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Montage 6 in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info