707395
22
Zoom out
Zoom in
Previous page
1/84
Next page
MODX Owner’s Manual
18
Power Supply
Connect the supplied AC adaptor in the following order.
Before you connect the AC adaptor, make sure the
[P] (Standby/On) switch on the instrument is set to the
Standby
(N) position.
1 Wrap the DC output cable of the AC adaptor
around the cable clip (as shown below), and
then connect the plug of the adaptor to the
DC IN jack on the rear panel.
NOTE
Use of the cable clip prevents accidental unplugging of the
cable during operation. Make sure to avoid tightening the cord
more than necessary or pulling on the cord strongly while it is
wrapped around the cable clip to prevent wear on the cord or
possible breakage of the clip.
2 Connect the other end of the AC adaptor to
an AC outlet.
NOTE
Reverse the order of the instruction steps above when disconnecting
the AC adaptor.
WARNING
Use the specified AC adaptor (page 71) only. Using the wrong
AC adaptor can result in damage to the instrument or
overheating.
When using the AC adaptor with
a removable plug, make sure to
keep the plug attached to the AC
adaptor. Using the plug alone can
cause electric shock or fire.
Never touch the metallic section
when attaching the plug. To avoid
electric shock, short circuit or
damage, also be careful that
there is no dust between the AC
adaptor and plug.
CAUTION
When setting up the product, make sure that the AC outlet you
are using is easily accessible. If some trouble or malfunction
occurs, immediately turn the power off and disconnect the
plug from the outlet.
The instrument remains charged and draws a small amount of
power even when the [P] (Standby/On) is set to the Standby
position. For this reason, if you intend not to use it for an
extended period of time, make sure to unplug the power cord
from the wall outlet.
Connecting Speakers or Headphones
Since the instrument has no built-in speakers, you will need
to monitor the sound of the instrument by using external
equipment. Connect a set of headphones, powered
speakers, or other playback equipment as illustrated below.
When making connections, be sure that your cables have
the appropriate ratings.
Powering Up the System
Make sure the volume settings of the instrument and external
devices such as powered speakers are turned to the
minimum before turning the power on. When connecting the
instrument to powered speakers, turn on the power switch of
each device in the following order.
When turning the power on:
First, the instrument (the display will turn on and the buttons
will light), then the connected powered speakers.
When turning the power off:
First, the connected powered speakers, then the instrument
(the display will turn off and the buttons will turn off).
Keep in mind that the [P] (Standby/On) switch is located at
the left side (from the view of the keyboard) of the DC IN
socket on the rear panel of the instrument.
Setting Up
Cable clip
Be careful not to bend
the connector
1
2
DC IN jack (page 16)
AC outlet
AC adaptor
Plug
Slide the plug as indicated.
The shape of the plug differs
depending on your area.
Powered speaker (left)
Powered speaker (right)
Headphones
OUTPUT L/MONO OUTPUT R
PHONES
DC IN
[P] (Standby/On) switch
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Modx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Modx in the language / languages: English as an attachment in your email.

The manual is 13,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha Modx

Yamaha Modx User Manual - German - 80 pages

Yamaha Modx User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info