707395
21
Zoom out
Zoom in
Previous page
1/84
Next page
MODX Owner’s Manual
17
Controls and Functions
Left side of Rear Panel
1 [USB TO HOST] terminal
Used to connect this instrument to a computer via a USB
cable, and allows you to transfer MIDI data and audio data
between the devices. Unlike MIDI, USB can handle multiple
ports via a single cable (page 56). For information about
how the MODX handles Ports, see page 56.
NOTE
Audio data sending capability for this instrument is a maximum
10 channels (5 stereo channels). Audio data receiving capability is a
maximum 4 channels (2 stereo channels).
2 [USB TO DEVICE] terminal
Used to connect this instrument to a USB flash drive. This
lets you save data created on this instrument to a USB flash
drive and load data from a USB flash drive to the instrument.
Save/Load operations can be performed: [UTILITY]
[Contents] [Store/Save] or [Load].
NOTE
Only USB flash drives can be recognized by this instrument. No
other USB devices (such as a hard disk drive, CD-ROM drive and
USB hub) can be used.
The instrument supports the USB 1.1 to 3.0 standard. However,
note that the transfer speed differs depending on the data type
and the condition of this instrument.
Right side of Rear Panel
3 MIDI [IN], [OUT] terminals
MIDI [IN] is for receiving control or performance data from
another MIDI device, such as an external sequencer, letting
you control this instrument from the connected separate
MIDI device.
MIDI [OUT] is for transmitting all control, performance and
playback data from this instrument to another MIDI device,
such as an external sequencer. Also, MIDI [OUT] can be
used as MIDI Thru. To change the settings, press the
[UTILITY] button to open the Utility display.
4 FOOT SWITCH [ASSIGNABLE]/[SUSTAIN]
jacks
For connection of a separately sold FC3/FC4/FC5 Footswitch
to the [SUSTAIN] jack and a FC4/FC5 Footswitch to the
[ASSIGNABLE] jack. When connected to the [SUSTAIN]
jack, the Footswitch controls sustain. When connected to
[ASSIGNABLE], it can control one of various assignable
functions.
NOTE
The term “FC3” in this Owner’s Manual refers collectively to the
FC3 and other footswitches compatible with the FC3, such as the
FC3A.
The term “FC4” in this Owner’s Manual refers collectively to the
FC4 and other footswitches compatible with the FC4, such as the
FC4A.
5 FOOT CONTROLLER [1]/[2] jacks
For connection of a separately sold foot controller (FC7,
etc.). This jack lets you continuously control one of various
different assignable functions for Part edit—such as volume,
tone, pitch, or other aspects of the sound (see the Reference
Manual PDF document).
6 OUTPUT [L/MONO] and [R] jacks
Line level audio signals are output via these standard phone
jacks. For monophonic output, use only the [L/MONO] jack.
7 [PHONES] (Headphone) jack
This standard stereo phones jack is for connection to a set of
stereo headphones. This jack outputs audio signals identical
to those from the OUTPUT [L/MONO] and [R] jacks.
8 A/D INPUT [L/MONO]/[R] jacks
External audio signals can be input via these phone jacks
(1/4" mono phone plug). Various devices such as a
microphone, CD player or synthesizer can be connected to
these jacks and their audio input signal can be sounded as
the Audio Part.
In addition, you can use the special Vocoder feature by
connecting a microphone to this [L/MONO] jack and
inputting your voice to the microphone.
You can also use the Envelope Follower and ABS (Audio
Beat Sync) features. Envelope Follower is a function for
detecting the volume envelope of the input signal waveform
and modifying sounds dynamically.
NOTE
A guitar or bass having active pickups can be directly connected.
However, when using passive pickups, connect the instrument via
an effect device.
The Vocoder/Envelope Follower can be controlled from all Part
outputs, and not just the A/D INPUT [L/MONO]/[R] jacks.
ABS (Audio Beat Sync) is a function for detecting the beat of
the audio signal input from these jacks and synchronizing
the beat with the Motion Sequencer or Arpeggio.
Use 1/4" mono phone plugs. For stereo signals (such as from
audio equipment), use the [L/MONO]/[R] jacks. For mono
signals (such as from a microphone or guitar), use only the
[L/MONO] jack.
For details about the Envelope Follower and ABS features,
see the Reference Manual PDF document.
9 [P] (Standby/On) switch
Press to set the power to On or Standby.
) [DC IN]
Plug the AC adaptor supplied with this instrument.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Modx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Modx in the language / languages: English as an attachment in your email.

The manual is 13,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha Modx

Yamaha Modx User Manual - German - 80 pages

Yamaha Modx User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info