Determines the amount by which played velocities are adjusted for the actual resulting velocity effect. This lets
you raise or lower all velocities by the same amount—allowing you to automatically compensate for playing too
strongly or too softly.
Settings:0 – 127
[F2] OUTPUT
[SF1] VOL/PAN (Volume/Pan)
VolumeDetermines the volume for each part, allowing you to set the optimum level balance of all the Parts.
Settings:0 – 127
PanDetermines the stereo pan position for each Part.
Settings:L63 (far left) – C (center) – R63 (far right)
VoiceELPan (Voice Element Pan)Determines whether the individual pan settings for each Voice (made via [VOICE] → [EDIT] → Element
selection → [F4] AMP → [SF1] LVL/PAN → Pan) are applied or not. When this is set to “off,” the basic pan
position for the selected Part is set to center.
Settings:on, off
[SF2] EF SEND (Effect Send)
From this display you can set the Send Level and Dry Level sent to the System Effects for each Part. For details
on the Effect connections in the Performance mode, see page 143.
RevSend (Reverb Send)Determines the send level for the Reverb effect of the selected Part, giving you detailed control over the
Reverb balance among the Parts.
Settings:0 – 127
ChoSend (Chorus Send)Determines the send level for the Chorus effect of the selected Part, giving you detailed control over the
Chorus balance among the Parts.
Settings:0 – 127
Dry LevelDetermines the level of the unprocessed (dry) sound of the selected Part, letting you control the overall effect
balance among the Parts.
Settings:0 – 127
[SF3] SELECT (Output Select)
InsEF (Insertion Effect)Determines whether the Insertion effects are applied to the output signal from the rear panel or not.
Settings:on, off
[F3] EQ (Equalizer)
From this display you can adjust the EQ settings for each Part. Note that two different display types listed below are provided and you can switch between
them by pressing the [SF5] button. Each display type features the same settings in a different format; use the type you feel most comfortable with.
• Display showing four Parts
• Display showing all parameters for one Part
Keep in mind that since all the available parameters cannot be simultaneously displayed in the four-Part display, you will need to use the cursor controls to
scroll the display in order to see and set the other parameters.
For details about the Effect connection including the EQ in the Performance mode, see page 143.
LowFreq (Low Frequency)Determines the center frequency of the low EQ band that is attenuated/boosted.
Settings:50.1 – 2.00K
LowGain (Low Gain)Determines the amount of boost or attenuation applied to the low EQ band.
Settings:-32 – +32
MidFreq (Middle Frequency)Determines the center frequency of the middle EQ band that is attenuated/boosted.
Settings:139.7 – 10.1K
MidGain (Middle Gain)Determines the amount of boost or attenuation applied to the middle EQ band.
Settings:-32 – +32
MidReso (Middle Resonance)Determines the resonance applied to the center frequency of the middle EQ band.
Settings:0 – 31
HighFreq (High Frequency)Determines the center frequency of the high EQ band that is attenuated/boosted.
Settings:503.8 – 14.0K
HighGain (High Gain)Determines the amount of boost or attenuation applied to the high EQ band.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MO8 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.
The manual is 5,36 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
