From this display you can set the Arpeggio related parameters.
[SF1] TYPE
Same as in Normal Voice Common Edit. See page 154.
[SF2] LIMIT
[SF3] PLAY FX (Play Effect)
[SF4] OUT CH (Output Channel)
From this display you can set a separate MIDI output channel for the Arpeggio playback data, letting you have
the Arpeggio sound from an external tone generator or synthesizer.
OutputSwitchWhen this is set to on, Arpeggio playback data is output via MIDI.
Settings:on, off
TransmitChDetermines the MIDI transmit channel for Arpeggio playback data. When set to “KbdCh,” the Arpeggio
playback data is output via the MIDI Keyboard Transmit Channel ([UTILITY] → [F5] MIDI → KBDTransCh).
Settings:1 – 16, KbdCh (Keyboard Channel)
[F4] CTL ASN (Controller Assign)
You can assign Control Change numbers to the controllers listed below, letting you use the hardware controllers on the keyboard to alter the sound of
external MIDI devices, via the appropriate MIDI messages. When the MO receives Control Change data corresponding to the settings here, the internal tone
generator responds as if the instrument's controllers were used.
BC (Breath Controller)The MO does not have a jack to connect a Breath Controller. However, the MO responds as if a Breath
Controller was used when receiving Control Change messages over the Control Change number determined in
this parameter.
RB (Ribbon Controller)The MO does not have a Ribbon Controller. However, the MO responds as if a Ribbon Controller was used
when receiving Control Change messages over the Control Change number determined in this parameter.
AS1 (Assign 1),
AS2 (Assign 2)
Determines the Control Change number generated when you control the ASSGN 1 (Knob3) and the ASSIGN 2
(Knob4) with both the [PAN/SEND] and [TONE] lamp turned on.
FC1 (Foot Controller 1)Determines the Control Change number generated when you use the Foot Controller connected to the FOOT
CONTROLLER jack.
FC2 (Foot Controller 2)The MO has only one jack for connection to a Foot Controller. However, the MO responds as if a 2nd Foot
Controller was used when receiving Control Change messages over the Control Change number determined in
this parameter.
nKeep in mind that the functions of these controllers set here are not changed for the internal tone generator. The controller assignments for the MO itself depend on
the settings of the Voices assigned to each Part.
[F6] EFFECT
This menu gives you comprehensive control over the effects. For details on the Effect connections in the Performance mode, see page 143.
[SF1] CONNECT (Connection)
For more information on parameters, refer to page 143.
[SF2] INS SW (Insertion Switch)
The Insertion Effects can be applied to up to three Parts. This display lets you set to which Parts the Insertion
Effects are applied.
[SF4] REVERB
The number of parameters and values available differs depending on the currently selected effect type. Refer
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MO8 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.
The manual is 5,36 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
