530341
92
Zoom out
Zoom in
Previous page
1/240
Next page
Quick Guide Creating a Song on the MO
Creating a Song
92
Owner’s Manual
As shown below, the Jobs are divided into six main groups,
each of which is selected using the [F1] – [F6] buttons.
After specifying the track and range over which the Job is
to be applied, set Quantize to “ ” (8th note) according to
the notation example above. Set the Strength to “100%,”
SwingRate to “050%,” and GateTime to “100%.” Regarding
these parameters, see page 183.
n Set the Quantize value to correspond to the smallest value notes in
the track you are working with. For example, if the data was
recorded with both quarter notes and eighth notes, use eighth note
for the quantize value.
After the Job has been completed, a “Completed”
message appears and operation returns to the original
display.
An “Executing... message is shown when it takes a short amount of
time to execute the Job. Never attempt to turn off the power while the
Job is being executed. Turning the power off in this state results in loss
of all user data.
If you are satisfied with the result of the Job, go to step 7.
If not, execute the UNDO Job in the [F1] UNDO display in
the Song Job mode to restore the data to its previous state,
then try out the Job (from step 4) again. For details about
Undo, see next page.
In addition to Quantize, you’ll find a variety of other useful
and powerful Jobs in the Song Job mode (page 183) and
Pattern Job mode (page 199).
Song Location
The Song Play mode has a convenient Location function
that lets you jump to user-specified parts of a Song. This
lets you assign a specific measure number in the selected
Song, and instantly jump to the assigned measure—either
during playback or when the Song is stopped. Two
Locations can be assigned.
Assigning Locations
Select the desired measure in the recorded Song for the
Location. (Highlight “MEAS” and use the [INC/YES] and
[DEC/NO] buttons or data dial.) Then, to assign the
measure to Location 1, simultaneously hold down the [SET
LOCATE] button and press the [G] (Reverse) button.
To assign Location 2, use the [H] (Forward) button.
Jumping to an assigned Location
To instantly jump to the assigned Location 1 or 2,
simultaneously hold down the [SET LOCATE] button and
pressing the [G] (Reverse) button (for Location 1) or the
[H] (Forward) button (for Location 2).
2
Press the [JOB] button to enter the Song Job
mode.
[F1] UNDO Undo (Canceling the executed Job)/Redo
(Restoring the executed Job) functions
[F2] NOTE Note Data Job
[F3] EVENT Event Job
[F4] MEAS Measure Job
[F5] TRACK Track Job
[F6] SONG Song Job
3
Press the [F2] NOTE button, move the cursor
to “01: Quantize” then press the [ENTER]
button to call up the Quantize Job display.
4
Set the relevant Job parameters.
5
Press the [ENTER] button to execute the Job.
[F1] [F2] [F3] [F4] [F5] [F6]
Indicates the Job List. Because all the Jobs cannot be
displayed simultaneously, you will need to use the cursor
buttons to scroll the display in order to find the desired Job.
Track over which
the Job is applied
Range over which
the Job is applied
CAUTION
6
Press the [SONG] button to return to the Song
Play mode, then press the [F] button to hear
the Song over which the Job is applied.
7
Save the Song data to a USB storage device in
the File mode (page 98) before turning the
power off.
EDIT
COMPARE SCENE STORE
JOB STORE
SET LOCATE
LOCATE
REC
12
SEQ TRANSPORT
Specify a measure number
to be registered.
In this example, the selected measure
is assigned to Location 1. The current
settings for Locations 1 and 2 are
shown at the top right of the display.
LOCATE
REC
12
SEQ TRANSPORT
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MO8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO8

Yamaha MO8 User Manual - German - 239 pages

Yamaha MO8 User Manual - French - 239 pages

Yamaha MO8 User Manual - Portuguese - 240 pages

Yamaha MO8 User Manual - Spanish - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info