Manual Yamaha MO8 (page 91 of 240) (English)

530341

Zoom out

Zoom in

1/240

Creating a Song

Owner’s Manual

Quick GuideCreating a Song on the MO

● Editing/Deleting Existing Events

To edit data in the Event List, use the up/down cursor

buttons to highlight the speciﬁc event you want to edit, and

use the left/right cursor buttons to highlight the data type or

parameter to be edited. Then, change the value as needed

by using the [INC/YES] and [DEC/NO] buttons or the data

dial.

The entire line of the edited event will ﬂash on the display.

Press the [ENTER] button to actually enter the edited data

(the entire line of the edited event will stop ﬂashing). To

abort an edit simply highlight to a new event location

without pressing the [ENTER] button.

Press the [F6] button to delete the event at the current

location.

● Inserting New Events

To insert an event, use the up/down cursor buttons to

highlight an event at the desired point in the track measure,

beat, clock)—this is the location to which the new event will

be inserted. Then, follow the steps below.

In the Event List display, you can edit various types of

events such as Voice, volume, and pan as well as note

events. This means that you could, for example, enter

Voice changes to the middle of a track, even if the track

was recorded using only one Voice.

n For details about the MIDI events handled in the Event List display,

see page 182.

n If you ﬁnd the display too cluttered, you can ﬁlter out certain event

types with the View Filter. Simply press the [F2] VIEW FLT button

and select the event types you want to be displayed. For details,

see page 182.

Since the Song can be played back from within the Song

Edit mode, you can instantly hear and check the changes

you’ve made while editing. If you want to hear just the track

being edited, use the Solo function (page 75).

■ Transforming the recorded data and other

operations—Song Job mode

The Song Job mode has a wide variety of operations for

changing and working with Song data. Virtually all of the

Jobs share the same procedure, so we’ll explain only one

of them here—Quantize, which lets you clean up the timing

of a previously recorded track.

In the following example, this musical passage has been

written with exact quarter-note and eighth-note values.

Even though you think you may have recorded the

passage accurately, your actual performance may be

slightly ahead of or behind the beat (or both!). Quantize

allows you to align all the notes in a track so that the timing

is absolutely accurate to the speciﬁed note value.

Edit the MIDI events of the Song.

When changing the value, the entire line will ﬂash on the

display indicating this is being edited and not ﬁxed yet.

The line stops ﬂashing and

the value is actually entered.

Press the [F6] button to delete

the event at the current location.

[ENTER] button

ENTER

EXECUTE

Press the [F1] button or [EXIT] button

to abort and return to the main Event

List display.

Press the [F6] SET button to actually insert

the event shown in the display and remain

in display. If you wish to insert the event

type currently shown in the display several

times, use [F6] SET and press the [F1] or

[EXIT] button to return to the main Event

List display.

Press the [ENTER] button to actually insert the

event and return to the main Event List display.

[F5] button

[F1] button

Press the [F] (Play) button to hear your

edited data.

Edit other tracks as required by repeating

steps 3 through 5 as desired.

After editing, press the [SONG] button to

return to the Song Play mode.

Save the edited Song data to a USB storage

device (page 98) before turning the power off.

Press the [SONG] button to enter the Song

Play mode, then select a Song for which the

Job is to be applied.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO8

Yamaha MO8 User Manual - German - 239 pages

Yamaha MO8 User Manual - French - 239 pages

Yamaha MO8 User Manual - Portuguese - 240 pages

Yamaha MO8 User Manual - Spanish - 240 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha MO8 Manual

Product: